Construction and Trade   

This online Biofuel Production Operations course will give you the education you need to work as a biofuel production operator, inspect and repair equipment, operate computer systems, and handle lab equipment.

Requirements:

Hardware Requirements:

• This course must be taken on a PC. Macs are not compatible.

Software Requirements:

• PC: Windows 8 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge is also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

At the present time, hundreds of facilities worldwide are producing biofuels. Over the next few decades, many advances will be made in this field and hundreds of new facilities will be built to produce this type of fuel. This opens a new field for potential workers. For decades to come, biofuels will be produced and consumed in the United States, creating an ongoing demand for biofuel production workers.

The Biofuel Production Operations Online Training course will give you the education you need to begin an exciting career in biofuel production. As a biofuel production operator, your job will be to ensure the quality and purity of the biofuel your plant produces. This involves inspecting and repairing equipment, operating computer systems, and handling lab equipment. This online course will ensure you have the skills you need to handle these tasks.

1. Basic Hazard Communication
2. Basic Safety
3. Basic Lockout-Tagout
4. Math 1000: Basic Math 1
5. Math 2000: Basic Math 2
6. Math 2500: Basic Math 3
7. Applied Physics 1
8. Applied Physics 2
9. Applied Physics 3
10. Heat Exchangers
11. Lubrication and Bearings
12. Electrical Safety
13. Electricity for Operators and Technicians
14. Industrial Valves
15. Compressed Air
16. How to Read Process Drawings
17. Basic Process Instrumentation and Control
18. Pump Fundamentals
19. Centrifugal Pumps: Operation
20. Biofuels 1000: An Introduction to Biofuels
21. Biofuels 1500: Biofuel Feedstocks
22. Biofuels 2000: Bioalcohols—Use as a Fuel Source
23. Biofuels 2500: Basic Fermentation Technology
24. Biofuels 3000: Basic Distillation Technology
25. Biofuels 4000: Ethanol Production Systems

What you will learn

• Describe basic math, physics, and chemistry knowledge necessary for a biofuel production operator to know
• Know basic safety aspects related to biofuel production
• Understand basic elements of electricity for energy production workers
• Read technical process drawings
• Describe basic operational elements of lubrication and centrifugal pumps
• Be familiar with the natural vegetation sources that can be used for biofuels
• Know how ethanol and bio-diesel is produced
• Describe how basic fermentation systems and alcohol distillation systems work
• Understand various methods used to purify biofuel

How you will benefit

• Help the nation turn toward alternate energy sources
• Jump-start your career in the alternate energy industry
• Gain exposure to the technical aspects of hydrocarbons, energy, and industrial processes
• Earn high wages, enjoy better job security, and have the potential to advance into supervisory or management positions as a biofuel production operator
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email, online forms, and phone.

Prepare for an entry-level position in a chemical plant with this online Chemical Plant Operations course.

Requirements:

Hardware Requirements:

• This course must be taken on a PC. Macs are not compatible.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge is also compatible.
• Software must be installed and fully operational before the course begins.
• Adobe Acrobat Reader.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment. You're encouraged to print the on-screen course material for your reference.

In the United States, there are thousands of chemical manufacturing facilities, run by chemical plant operators. These operators are highly paid and enjoy a stable work environment, and there is an ongoing need for entry-level personnel. Currently, a large portion of the workforce is retiring, creating a critical shortage of technical workers for many years to come.

This course can help you get started. There are very few institutions that provide training for entry-level operators. This Chemical Plant Operations Online Training course is unique and user-friendly, designed for people who have minimal knowledge of the industry or math, physics, or chemistry. The necessary science concepts are built into the course modules. Get started in the field by taking the Chemical Plant Operations Online Training course!

1. Basic Safety
2. Basic Hazard Communication
3. Basic Lockout-Tagout
4. Math 1000: Basic Math 1
5. Math 2000: Basic Math 2
6. Math 2500: Basic Math 3
7. Applied Physics 1
8. Applied Physics 2
9. Applied Physics 3
10. Heat Exchangers
11. Lubrication and Bearings
12. Electrical Safety
13. Electricity for Operators and Technicians
14. Industrial Valves
15. Compressed Air
16. How to Read Process Drawings
17. Basic Process Instrumentation and Control
18. Pump Fundamentals
19. Centrifugal Pumps: Operation
20. Chemistry Fundamentals
21. Chemical Reactions
22. Chemical Reactors

What you will learn

• Learn how to operate as an entry-level chemical plant operator
• Understand basic elements of math, physics, and chemistry
• Learn to ensure units and process systems within the plant function properly
• Master necessary safety measures needed for the role

How you will benefit

• Jump-start your career in chemical plant operations
• Develop the vocabulary needed to effectively communicate on the job
• Learn safety and legal regulations that will allow you to be safe while you work
• Explore career advancement opportunities that will allow you to step into a managerial role in the future
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

   

This is not an instructor facilitated course; however, support will be provided through email, online forms, and phone.

This course provides an intensive overview of workholding, math, inspection, safety, metal cutting, materials, quality, and grinding. These skills are essential for working as a CNC machinist.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Computers play a significant role in much of the world today, with many organizations using technology to help streamline business operations. The manufacturing industry is no exception, and you can make yourself an indispensable part of the future of manufacturing by training to become a Computer Numerical Control (CNC) machinist. This online CNC Machinist course will provide you with the knowledge and skills you need to prove competency and begin your career quickly.

This CNC machinist training course provides an intensive overview of the skills necessary to perform CNC machining, including workholding, math, inspection, safety, metal cutting, materials, quality, and grinding.

Want an even more immersive learning experience? Ask about our CNC Machinist with VR Training course, which includes a VR headset for interactive, simulation-based training!

1. Abrasives
1. Grinding Processes 201
2. Grinding Safety 211
3. Basics of the Surface Grinder 231
4. Setup for the Surface Grinder 241
5. Surface Grinder Operation 251
6. Introduction to Grinding Fluids
7. Grinding Ferrous Metals 311
8. Grinding Nonferrous Materials 321
9. Grinding Wheel Materials 331
10. Dressing and Truing 341
11. Grinding Wheel Geometry 361
2. CNC
1. Introduction to CNC Machines 201
2. Basics of the CNC Lathe 211
3. Basics of the CNC Mill 212
4. CNC Specs for the Mill 220
5. Coordinates for the CNC Lathe 221
6. Coordinates for the CNC Mill 222
7. CNC Specs for the Lathe 225
8. Basics of the G Code Programming 231
9. Introduction to CAD and CAM for Machining 241
10. Control Panel Functions for the CNC Lathe 251
11. Control Panel Functions for the CNC Mill 252
12. Offsets on the CNC Lathe 261
13. Offsets on the CNC Mill 262
14. Creating a CNC Turning Program 301
15. Creating a CNC Milling Program 302
16. Calculations for Programming the Lathe 311
17. Calculations for Programming the Mill 312
18. Canned Cycles for the Lathe 321
19. Canned Cycles for the Mill 322
3. CNC Controls: Fanuc
1. Fanuc Mill: Control Panel Overview 250
2. Fanuc Lathe: Control Panel Overview 255
3. Fanuc Mill: Entering Offsets 260
4. Fanuc Lathe: Entering Offsets 265
5. Fanuc Mill: Locating Program Zero 270
6. Fanuc Lathe: Locating Program Zero 275
7. Fanuc Mill: Program Execution 280
8. Fanuc Lathe: Program Execution 285
9. Fanuc Mill: Program Storage 310
10. Fanuc Mill: Program Storage 315
11. Fanuc Mill: First Part Runs 320
12. Fanuc Mill: First Part Runs 325
4. CNC Controls: Haas
1. Haas Mill: Classic Control Panel Overview 250
2. Haas Lathe Classic Control Panel Overview 256
3. Hass Mill Classic Controls: Entering Offsets 260
4. Hass Lathe Classic Controls: Entering Offsets 265
5. Haas Mill Classic Controls: Locating Program Zero 270
6. Haas Lathe Classic Controls: Locating Program Zero 275
7. Haas Mill Classic Controls: Program Execution 280
8. Haas Lathe Classic Controls: Program Execution 285
9. Haas Mill Classic Controls: Program Storage 310
10. Haas Lathe Classic Controls: Program Storage 315
11. Haas Mill Classic Controls: First Part Runs 320
12. Haas Lathe Classic Controls: First Part Runs 325
5. CNC Controls: Mazak
1. Mazak Mill: Control Panel Overview 250
2. Mazak Lathe: Control Panel Overview 255
3. Mazak Mill: Locating Program Zero 270
4. Mazak Lathe: Locating Program Zero 275
5. Mazak Mill: Entering Offsets 280
6. Mazak Lathe: Entering Offsets 285
7. Creating an EIA/ISO Program for the Mazak Mill 286
8. Creating an EIA/ISO Program for the Mazak Lathe 287
9. Creating a Mazatrol Program for the Mill 288
10. Creating a Mazatrol Program for the Mazak Lathe 289
11. Mazak Mill: Program Execution 290
12. Mazak Lathe: Program Execution 295
13. Mazak Mill: Program Storage 310
14. Mazak Lathe: Program Storage 315
15. Mazak Mill: First Part Runs 320
16. Mazak Lathe: First Part Runs 325
6. Electrical Systems
1. Safety for Electrical Work 111
7. Inspection
1. Basic Measurement 101
2. Calibration Fundamentals 111
3. Basics Tolerance 121
4. Blueprint Reading 131
5. Hole Standards and Inspection 141
6. Thread Standards and Inspection 151
7. Surface Texture and Inspection 201
8. Interpreting Prints 231
9. Introduction to GD&T 301
10. Major Rules of GD&T 311
11. Inspecting with Optical Comparators 351
12. Inspecting with CMMs 361
13. In-Line Inspection Applications 381
8. Lean
1. Lean Manufacturing Overview 101
2. Continuous Process Improvement: Managing Flow 124
3. Continuous Process Improvement: Identifying and Eliminating Waste 125
4. Total Productive Maintenance 141
5. 5S Overview 151
6. Cell Design and Pull Systems 161
7. Intro to Six Sigma 171
8. Troubleshooting 181
9. Conducting kaizen Events 191
10. SPC Overview 211
11. Metrics for Lean 231
12. Process Flow Charting 241
13. Strategies for Setup Reduction 251
14. Value Stream Mapping: The Current State 301
15. Six Sigma Goals and Tools 310
16. Value Stream Mapping: The Future State 311
9. Manual Machining
1. Manual Mill Basics 201
2. Engine Lathe Basics 211
3. Manual Mill Setup 221
4. Engine Lathe setup 231
5. Benchwork and Layout Operations 241
6. Manual Mill Operation 251
7. Engine Lathe Operation 261
8. Holemaking on the Manual Mill 271
9. Threading on the Engine Lathe 301
10. Taper Turning on the Engine Lathe 311
10. Materials
1. Introduction to Physical Properties 101
2. Introduction to Mechanical Properties 111
3. Introduction to Metals 121
4. Introduction to Metal Manufacturing 180
5. Classification of Steel 201
6. Essentials of Heat Treatment of Steel 211
7. Hardness Testing 221
8. Ferrous Metals 231
9. Nonferrous Metals 241
10. Exotic Alloys 301
11. Metal Cutting
1. Safety for metal Cutting 101
2. Cutting Processes 111
3. Overview of Machine tools 121
4. Basic Cutting Theory 201
5. Band Saw Operation 211
6. Introduction to Metal Cutting Fluids 221
7. Metal Cutting Fluid Safety 231
8. Toolholders for Turning 260
9. Speed and Feed for the Lathe 301
10. Speed and Feed for the Mill 311
11. Cutting Tool Materials 321
12. Machining Titanium Alloys 325
13. Carbide Grade Selection 331
14. ANSI Insert Selection 341
15. Lathe Tool Geometry 351
16. Mill Tool Geometry 361
17. Drill Tool Geometry 371
12. Quality
1. ISO 9001: 2015 Review 122
2. Approaches to Maintenance 131
3. Process Design and Development 133
4. Production System Design and Development 136
5. Customer-Focused Quality 155
13. Safety
1. Introduction to OSHA 101
2. Ergonomics 102
3. Personal Protective Equipment 111
4. Noise Reduction and Hearing Conversation 121
5. Respiratory Safety 131
6. Lockout/Tagout Procedures 141
7. SDS and Hazard Communication 151
8. Bloodborne Pathogens 161
9. Walking and Working Surface 171
10. Fire Safety and Prevention 181
11. Flammable/Combustible Liquids 191
12. Hand and Power Tool Safety 201
13. Safety for Lifting Devices 211
14. Powered Industrial Truck Safety 221
15. Confined Spaces 231
16. Environmental Safety Hazards 241
17. Machine Guarding 271
14. Shop Essentials (Applied Mathematics)
1. Math Fundamentals 101
2. Math: Fractions and Decimals 111
3. Units if Measurement 112
4. Algebra Fundamentals 141
5. Geometry: Lines and Angles 151
6. Geometry: Triangles 161
7. Geometry: Circles and Polygons 171
8. Trigonometry: The Pythagorean Theorem 201
9. Trigonometry: Sine, Cosine, Tangent 211
10. Trigonometry: Sine Bar applications 221
11. Statistics 231
15. Stamping
1. Press Basics 110
16. Supervisor Essentials
1. Essentials of Leadership 100
2. Managing Performance: Best Practices 130
3. Managing Performance: Corrective Actions 135
4. Basics of Manufacturing Costs 140
5. Intro to Managerial Accounting 145
6. Conflict Resolution Principles 150
7. Conflict Resolution for Different Groups 155
8. Team Leadership 160
9. Manufacturing Management 180
10. Personal Effectiveness 190
11. Managing the Diverse Workplace 210
12. Harassment and Discrimination 215
13. Performance Management and the Law 230
17. Welding
1. Fabrication Process 232
18. Workforce Essentials
1. Essentials of Communication 115
19. Workholding
1. Introduction to Workholding 101
2. Supporting and Locating Principles 111
3. Locating Devices 121
4. Clamping Basics 131
5. Chucks, Collets, and Vises 141
6. Fixture Body Construction 200
7. Fixture Body Construction 200
8. Fixture Design Basics 201
9. Drill Busing Selection 230
20. Virtual Labs/Simulations (optional)
1. Safety Awareness in Manufacturing
2. Fire Safety
3. 5S and Hand Tool Identification
4. Inspecting Outer Diameters I
5. Inspecting Outer Diameters II
6. Inspecting Groove Width
7. Inspecting Thread Sizes
8. Inspecting Inside Diameter
9. Inspecting Depth
10. Establishing Datums

What you will learn

• Production floor safety
• CNC controls and programming
• Metallurgy
• Machining and grinding processes
• Inspection methods
• Six Sigma, 5S, Lean, and TPM
• Workholding principles

How you will benefit

• Prepare for a career as a computer numerical control (CNC) machinist, CNC machine operator, CNC lathe operator, CNC mill operator, CNC operator, machine operator, or machinist
• Gain the skills you need to confidently perform your job

This is not an instructor facilitated course; however, support will be provided through email.

The Composites Technician course provides an intensive overview of the skills needed for composites processing. You will learn math, inspection, safety, materials, quality, machining, and joining skills.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Does working with special materials interest you? Are you looking for a lucrative and stable career? Consider becoming a composite technician. This online composites technician course can provide you with the knowledge and skills you need to prove competency and begin your career quickly.

This advanced manufacturing training provides an intensive overview of the skills necessary for composites processing, including math, inspection, safety, materials, quality, machining, and joining necessary to work as a composite technician.

1. Adhesives
   1. Intro to Adhesive Bonding 11
   2. Basics of Bonding Process 120
   3. Intro to Adhesive Properties 130
   4. Types of Adhesives 140
   5. Surface Preparation 210
   6. Steps for Adhesive Application 220
2. CNC
   1. Introduction to CAD and CAM for Machining 241
3. Composites
   1. Intro to Composites 110
   2. Safety for Composite Processing 115
   3. Overview of Composite Processes 120
   4. Traditional Composites 125
   5. Advanced Thermoset Resins for Composites 130
   6. Advanced Materials for Composites 135
   7. Intro to Lay-up and Spray-up Molding 140
   8. Intro to Compression Molding 170
   9. Surface Finishing composites 190
   10. Vacuum Bagging Technique: Single-sided Bagging 230
   11. Composite Inspection and Defect Prevention 240
   12. Repair Methods for Composites 250
4. Inspection
   1. Basic Measurement 101
   2. Calibration Fundamentals 111
   3. Basics of Tolerance 121
   4. Blueprint Reading 131
   5. Hole Standards and Inspection 141
   6. Thread Standards and Inspection 151
   7. Surface Texture and Inspection 201
   8. Introduction to GD&T 301
   9. Inspecting with CMMs 361
   10. In-Line Inspection Applications 381
5. Lean
   1. Lean Manufacturing Overview 101
   2. Continuous Process Improvement: Managing Flow 124
   3. Continuous Process Improvement: Identifying and Eliminating Waste 125
   4. Total Productive Maintenance 141
   5. 5S Overview 151
   6. Intro to Six Sigma 171
   7. Troubleshooting 181
   8. SPC Overview 211
   9. Metrics for Lean 231
   10. Process Flow Charting 241
   11. Strategies for Setup Reduction 251
   12. Six Sigma Goals and Tools 310
6. Manual Machining
   1. Benchwork and Layout Operations 241
7. Materials
   1. Introduction to Physical Properties 101
   2. Introduction to Mechanical Properties 111
   3. Introduction to Metals 121
   4. Hardness Testing 221
   5. Ferrous Metals 231
   6. Nonferrous Metals 241
   7. Exotic Alloys 231
8. Metal Cutting
   1. Safety for Metal Cutting 101
   2. Machining Titanium Alloys 325
9. Quality
   1. ISO 9000 Review 121
   2. Approaches to Maintenance 131
10. Safety
    1. Introduction to OSHA 101
    2. Ergonomics 102
    3. Personal Protective Equipment 111
    4. Noise Reduction and Hearing Conservation 121
    5. Respiratory Safety 131
    6. Machine Guarding 140
    7. Lockout/Tagout Procedures 141
    8. SDS and Hazard Communication 151
    9. Bloodborne Pathogens 161
    10. Walking and Working Surfaces 171
    11. Fire and Safety and Prevention 181
    12. Flammable/Combustible Liquids 191
    13. Hand and Power Tool Safety 201
    14. Safety for Lifting Devices 211
    15. Powered Industrial Truck Safety 221
    16. Confined Spaces 231
    17. Environmental Safety Hazards 241
11. Shop Essentials (Applied Math)
    1. Math Fundamentals 101
    2. Math: Fractions and Decimals 111
    3. Units of Measurement 112
    4. Algebra Fundamentals 141
    5. Geometry: Lines and Angles 151
    6. Geometry: Triangles 161
    7. Geometry: Circles and Polygons 171
    8. Trigonometry: The Pythagorean Theorem 201
    9. Trigonometry: Sine, Cosine, Tangent 211
    10. Trigonometry: Sine Bar Applications 221
    11. Interpreting Blueprints 230
    12. Statistics 231
12. Supervisor Essentials
    1. Essentials of Leadership 110
    2. Essentials of Communication 120
    3. Managing Performance: Best Practices 130
    4. Managing Performance: Corrective Actions 135
    5. Basics of Manufacturing Costs 140
    6. Conflict Resolution Principle 150
    7. Conflict Resolution for Different Groups 155
    8. Team Leadership 160
    9. Personal Effectiveness 190
    10. Managing the Diverse Workplace 210
    11. Harassment and Discrimination 215
    12. Performance Management and the Law 230
13. Welding
    1. Material Tests for Welding 201
14. Virtual Labs/Simulations (optional)
    1. Hand Tool Safety
    2. Power Tool Safety
    3. Safety Awareness in Manufacturing
    4. Fire Safety
    5. Lockout Tagout Procedures
    6. Rigging Equipment Safety and Inspection
    7. 5S and Hand Tool Identification
    8. Inspecting Groove Width
    9. Inspecting Thread Sizes
    10. Inspecting Depth
    11. Inspecting Inside Diameter
    12. Inspecting Outer Diameters I
    13. Inspecting Outer Diameters II

What you will learn

• Production Floor Safety
• Composite Materials and Processing
• Metallurgy
• Lean, Six Sigma, 5S, and TPM
• Benchwork Operations
• Inspection Methods
• Adhesive Application and Bonding

How you will benefit

• Prepare for a career as a composites technician, certified composites technician (CCT), fabricator, operator technician, production associate, team assembler, or assembly operator
• Gain confidence in your ability to perform your job
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This course provides an intensive overview of die setting. You will learn the math, inspection, safety, materials, quality, and fabrication skills needed to work as a die setter.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Are you looking for a job where you can play a pivotal role during a manufacturing process? Consider a career as a die setter. This accelerated Die Setter course provides an intensive overview of math, inspection, safety, materials, quality, and fabrication, and will prepare for a successful career as a die setter.

1. CNC
   1. Introduction to CAD and CAM for Machining 241
2. Electrical Systems
   1. Safety for Electrical Work 111
3. Inspection
   1. Basic Measurement 101
   2. Basics of Tolerance 121
   3. Blueprint Reading 131
   4. Hole Standards and Inspection 141
   5. Thread Standards and Inspection 151
   6. Surface Texture and Inspection 201
   7. Inspecting a Prismatic Part 321
   8. Inspecting a Cylindrical Part 331
   9. In-Line Inspection Applications 381
4. Lean
   1. Lean Manufacturing Overview 101
   2. Continuous Process Improvement: Managing Flow 124
   3. Continuous Process Improvement: Identifying and Eliminating Waste 125
   4. Total Productive Maintenance 141
   5. 5S Overview 151
   6. Intro to Six Sigma 171
   7. Troubleshooting 181
   8. SPC Overview 211
   9. Metrics of Lean 231
   10. Process Flow Charting 241
   11. Strategies for Setup Reduction 251
   12. Six Sigma Goals and Tools 310
5. Materials
   1. Introduction to Physical Properties 101
   2. Introduction to Mechanical Properties 111
   3. Introduction to Metals 121
   4. Classification of Steel 201
   5. Essentials of Heat Treatment of Steel 211
   6. Ferrous Metals 231
   7. Nonferrous Metals 241
   8. Exotic Alloys 301
6. Mechanical Systems
   1. Lubricant Fundamentals 211
7. Metal Cutting
   1. Metal Cutting Fluid Safety 231
   2. Machining Titanium Alloys 325
   3. Optimizing Tool Life and Process 381
8. Motor Controls
   1. Limit Switches and Proximity Sensors 231
   2. Specs for Servomotors 330
9. Press Brake
   1. Press Brake Safety 100
   2. Press Brake Components 110
   3. Bending Fundamentals 120
   4. Die Bending Operations 130
   5. Operating the Press Brake 200
   6. Press Brake Specifications 220
10. Quality
    1. ISO 9001:2015 Review 122
    2. Approaches to Maintenance 131
    3. Process Design and Development 133
    4. Production System Design and Development 136
    5. Equipment/Tool Design and Development 137
    6. Customer-Focused Quality 155
11. Robotics
    1. Robot Sensors 315
    2. Robot Control Systems 317
12. Safety
    1. Introduction to OSHA 101
    2. Ergonomics 102
    3. Personal Protective Equipment 111
    4. Noise Reduction and Hearing Conservation 121
    5. Respiratory Safety 131
    6. Lockout/Tagout Procedures 141
    7. SDS and Hazard Communication 151
    8. Bloodborne Pathogens 161
    9. Walking and Working Surfaces 171
    10. Fire Safety and Prevention 181
    11. Flammable/Combustible Liquids 191
    12. Hand and Power Tool Safety 201
    13. Safety for Lifting Devices 211
    14. Powered Industrial Truck Safety 221
    15. Confined Spaces 231
    16. Environmental Safety Hazards 241
    17. Machine Guarding 271
13. Shop Essentials (Applied Mathematics)
    1. Math Fundamentals 101
    2. Math: Fractions and Decimals 111
    3. Units of Measurement 112
    4. Algebra Fundamentals 141
    5. Geometry: Lines and Angles 151
    6. Geometry: Triangles 161
    7. Geometry: Circles and Polygons 171
    8. Statistics 231
14. Stamping
    1. Press Basics 110
    2. Stamping Safety 115
    3. Punch and Die Operations 120
    4. Die Components 130
    5. Coil Handling Equipment 140
    6. Die Cutting Variable 200
    7. Monitoring Press Operations 220
    8. Coil loading Procedures 250
    9. Die Setting Procedures 300
15. Supervisor Essentials
    1. Essentials of Leadership 100
    2. Managing Performance: Best Practices 130
    3. Managing Performance: Corrective Actions 135
    4. Basics of Manufacturing Costs 140
    5. Conflict Resolution Principles 150
    6. Conflict Resolution for Different Groups 155
    7. Team Leadership 160
    8. Personal Effectiveness 190
    9. Managing the Diverse Workplace 210
    10. Harassment and Discrimination 215
    11. Performance Management and the Law 230
16. Welding
    1. Material Tests for Welding 201
17. Workforce Essentials
    1. Essentials of Communication 115
18. Workholding
    1. Clamping Basics 131
19. Virtual Labs/Simulations (optional)
    1. Hand and Power Tool Safety
    2. Safety Awareness in Manufacturing
    3. Fire Safety
    4. Lockout Tagout Procedures
    5. Rigging Equipment Safety and Inspection
    6. 5S and Hand Tool Identification
    7. Inspecting Groove Width
    8. Inspecting Thread Sizes
    9. Inspecting Depth
    10. Inspecting Inside Diameter
    11. Inspecting Outer Diameters I
    12. Inspecting Outer Diameters II

What you will learn

• Production Floor Safety
• Metallurgy
• Press Operation and Procedures
• Press Brake Operation and Procedures
• Six Sigma, 5S, Lean, and TPM
• Inspection Methods

How you will benefit

• Prepare for a career as a die setter or machine technician
• Gain the skills you need to confidently perform your job
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This course provides an intensive overview of electrical maintenance. You will learn the skills needed to work as an electrical technician, including math, inspection, safety, quality, electrical systems, automation, motor controls, and assembly.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Indeed.com ranks electrical technicians among the top 10 highest-paying roles in the electrician field. They must possess the professional skills and knowledge to collaborate and work independently within a manufacturing or factory environment, as they maintain key electrical equipment that is the backbone of the manufacturing industry.

Electrical professionals are required to understand the fundamentals of electricity and the components used to generate, control, and store it. This electrical technician course provides an intensive overview of the fundamental knowledge necessary for electrical maintenance, including math, inspection, safety, quality, electrical systems, automation, motor controls, and assembly.

Throughout this electrical technician training, you will also be introduced to practical skills, such as metal cutting, circuit calculations, robot troubleshooting, manufacturing management, and tools for threaded fasteners. Designed to encompass more in-demand skills than traditional electrical technician programs, specialized topics in manufacturing management like Six Sigma, 5S, Lean, Kaizen, TPM, and Siemens PLC hardware are comprehensively covered.

Unlike other electrician technician programs, when you enroll in our electrician technician course you will also receive a 25% discount on tools from IDEAL Industries. Get started in this electrotechnical course today and begin your career as an electrical technician!

1. Math
   1. Math Fundamentals 101
   2. Math: Fractions and Decimals 111
   3. Units of Measurement 112
   4. Basics of Tolerance 121
   5. Blueprint Reading 131
   6. Geometry: Lines and Angles 151
   7. Geometry: Triangles 161
   8. Geometry: Circles and Polygons 171
   9. Trigonometry: The Pythagorean Theorem 201
   10. Trigonometry: Sine, Cosine, Tangent 211
   11. Statistics 231
2. Inspection
   1. Basic Measurement 101
   2. Introduction to GD&T 301
   3. Major Rules of GD&T 311
   4. Inspecting a Prismatic Part 321
   5. Inspecting a Cylindrical Part 331
3. Safety
   1. Intro to OSHA 101
   2. Personal Protective Equipment 111
   3. Noise Reduction and Hearing Conservation 121
   4. Respiratory Safety 131
   5. Lockout/Tagout Procedures 141
   6. SDS and Hazard Communication 151
   7. Bloodborne Pathogens 161
   8. Walking and Working Surfaces 171
   9. Fire Safety and Prevention 181
   10. Flammable/Combustible Liquids 191
   11. Ergonomics 102
   12. Safety for Lifting Devices 211
   13. Powered Industrial Truck Safety 221
   14. Confined Spaces 231
   15. Environmental Safety Hazards 241
   16. Machine Guarding 140
4. Quality and Manufacturing Management
   1. Lean Manufacturing Overview 101
   2. Essentials of Leadership 110
   3. Essentials of Communication 120
   4. ISO 9001: 2015 Review 122
   5. Continuous Process Improvement: Managing Flow 124
   6. Manufacturing Process Applications: Part I 124
   7. Continuous Process Improvement: Identifying and Eliminating Waste 125
   8. Manufacturing Process Applications: Part II 125
   9. Managing Performance: Best Practices 130
   10. Approaches to Maintenance 131
   11. Managing Performance: Corrective Actions 135
   12. Total Productive Maintenance 141
   13. Conflict Resolution Principles 150
   14. 5S Overview 151
   15. Conflict Resolution for Different Groups 155
   16. Team Leadership 160
   17. Intro to Six Sigma 171
   18. Quality and Customer Service 175
   19. Manufacturing Management 180
   20. Troubleshooting 181
   21. Personal Effectiveness 190
   22. Conducting Kaizen Events 191
   23. Managing the Diverse Workplace 210
   24. SPC Overview 211
   25. Harassment and Discrimination 215
   26. TS 16949:2009 Overview 221
   27. Interpreting Blueprints 230
   28. Performance Management and the Law 230
   29. Metrics for Lean 231
   30. Process Flow Charting 241
   31. Strategies for Setup Reduction 251
   32. Preventative Maintenance for Fluid Systems 261
   33. Management Tools: Problem Solving 270
   34. Six Sigma Goals and Tools 310
5. Machining
   1. Safety for Metal Cutting 101
   2. Metal Cutting Fluid Safety 231
   3. Introduction to CAD and CAM for Machining 241
6. Electrical/Mechanical Systems and Motor Controls
   1. Electrical Units 101
   2. Safety for Electrical Work 111
   3. Forces of Machines 121
   4. Introduction to Circuits 201
   5. Relays, Contactors, and Motor Starters 201
   6. Introduction to Magnetism 211
   7. DC Circuit Components 221
   8. Distribution Systems 221
   9. NEC Overview 231
   10. AC Fundamentals 241
   11. Electrical Instruments 251
   12. Electrical Print Reading 261
   13. DC Power Sources 271
   14. AC Power Sources 281
   15. Conductor Selection 291
   16. Series Circuit Calculations 301
   17. Introduction to Electric Motors 301
   18. Parallel Circuit Calculations 311
   19. Symbols and Diagrams for Motors 311
   20. Logic and Line Diagrams 312
   21. Battery Selection 321
   22. Limit Switches and Proximity Sensors 360
7. PLCs
   1. Basics of Siemens PLCs 200
   2. Intro to PLCs 200
   3. Siemens PLC Hardware 210
   4. Hardware for PLCs 210
   5. Siemens PLC Communication 230
   6. Networking for PLCs 270
   7. Siemens PLC Inputs and Outputs 240
   8. PLC Inputs and Outputs 240
   9. Siemens Human Machine Interfaces 250
   10. Siemens SIMATIC Modular PLCs 260
   11. Hand-Held Programmers of PLCs 280
   12. Overview of PLC Registers 305
   13. Siemens SIMATIC S7-1200 PLCs 340
   14. Siemens SIMATIC S7-1500 PLCs 350
   15. Siemens Safety Integrated for Factory Automation 360
8. Automation
   1. Automated Systems and Control 135
   2. Robot Troubleshooting 160
   3. Robot Maintenance 170
   4. Robot Installations 230
   5. Industrial Network Integration 260
9. Fasteners
   1. Intro to Fastener Threads 110
   2. Overview of Threaded Fasteners 117
   3. Tools for Threaded Fasteners 120
   4. Overview of Non-Threaded Fasteners 125
   5. Intro to Fastener Ergonomics 130
   6. Properties for Fasteners 200
   7. Understanding Torque 210
   8. Threaded Fastener Selection 215

What you will learn

• Understand electrical systems
• Review troubleshooting best practices
• Discover and comprehend Six Sigma, 5S, Lean, Kaizen, and TPM
• Grasp how to apply GD&T fundamentals
• Obtain production floor safety measures
• Gain PLC equipment and communication basics
• Explore robot maintenance and installation

How you will benefit

• Prepare for a career as an electrical technician, wireman, maintenance electrician, control electrician, or industrial electrician
• Gain confidence in your ability to perform your job successfully
• Get the electrical technician training you need in a self-paced, online format
• Enrolled students in this electrical technician course are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

The Engineering Technician course provides an intensive overview of the skills necessary for this manufacturing role. You will learn about math, inspection, safety, materials, machining, quality, grinding, electrical systems, automation, motor controls, additive manufacturing, assembly, design, and management.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Are you a problem solver and a team player? Why not consider a career as an engineering technician? An engineering technician needs a practical understanding of engineering concepts to assist engineers and technologists in projects relating to research and development, implementation or operation. This course can provide you with the knowledge and skills you need to prove competency and begin your career as an engineering technician quickly.

This online Engineering Technician course provides an intensive overview of the skills necessary for this manufacturing role. You will learn math, inspection, safety, materials, machining, quality, grinding, electrical systems, automation, motor controls, additive manufacturing, assembly, design, and management necessary to work as an Engineering Technician.

1. Abrasives
   1. Grinding Processes 201
   2. Grinding Safety 211
   3. Basic Grinding Theory 221
   4. Basics of the Surface Grinder 231
   5. Basics of the Cylindrical Grinder 232
   6. Basics of the Centerless Grinder 233
   7. Setup for the Surface Grinder 241
   8. Setup for the Cylindrical Grinder 242
   9. Setup for the Centerless Grinder 243
   10. Surface Grinder Operation 252
   11. Cylindrical Grinder Operation 253
   12. Introduction to Grinding Fluids 261
   13. Grinding Ferrous Metals 311
   14. Grinding Nonferrous Materials 321
   15. Grinding Wheel Materials 331
   16. Grinding Wheel Geometry 361
2. Additive Manufacturing
   1. Introduction to Additive Manufacturing 111
   2. Additive Manufacturing Safety 121
   3. The Basic Additive Manufacturing Process 131
   4. Additive Manufacturing Methods and Materials 141
   5. Design for Additive Manufacturing 201
   6. Additive Manufacturing Materials Science 211
   7. Integrating Additive Manufacturing with Traditional Manufacturing 221
   8. Additive Manufacturing a Secondary Process 231
3. Adhesives
   1. Intro to Adhesive Bonding 110
   2. Basics of the Bonding Process 120
   3. Intro to Adhesive Properties 130
   4. Types of Adhesives 140
   5. Surface Preparation 210
   6. Steps of Adhesive Application 220
4. CNC
   1. Introduction to CNC Machines 201
   2. Basics of the CNC Lathe 211
   3. Basics of the CNC Mill 212
   4. Coordinates for the CNC Lathe 221
   5. Coordinates for the CNC Mill 212
   6. Basics of G Code Programming 231
   7. Introduction to CAD and CAM for Machining 241
   8. Control Panel Functions for the CNC Lathe 251
   9. Control Panel Functions for CNC Mill 252
   10. Offsets on the CNC Lathe 261
   11. Offsets on the CNC Mill 262
   12. Creating a CNC Turning Program 301
   13. Creating a CNC Milling Program 302
   14. Calculations for Programming the Lathe 311
   15. Calculations for Programming the Mill 312
   16. Canned Cycles for Lathe 321
   17. Canned Cycles for the Mill 322
5. CNC Controls: Fanuc
   1. Fanuc Mill: Control Panel Overview 250
   2. Fanuc Lathe: Control Panel Overview 255
   3. Fanuc Mill: Entering Offsets 260
   4. Fanuc Lathe: Entering Offsets 265
   5. Fanuc Mill: Locating Program Zero 270
   6. Fanuc Lathe: Locating Program Zero 275
   7. Fanuc Lathe: Program Execution 285
   8. Fanuc Mill: Program Storage 310
   9. Fanuc Lathe: Program Storage 315
   10. Fanuc Mill: First Part Runs 320
   11. Fanuc Lathe: First Part Runs 325
6. CNC Controls: Haas
   1. Haas Mill: Classic Control Panel Overview 250
   2. Haas Lathe Classic Control Panel Overview 256
   3. Haas Mill Classic Controls: Entering Offsets 260
   4. Haas Lathe Classic Controls: Entering Offsets 265
   5. Haas Mill Classic Controls: Locating Program Zero 270
   6. Hass Lathe Classic Controls: Locating Program Zero 275
   7. Haas Mill Classic Controls: Program Execution 280
   8. Hass Lathe Classic Controls: Program Execution 285
   9. Haas Mill Classic Controls: Program Storage 310
   10. Hass Milll Classic Controls: Program Storage 320
   11. Haas Lathe Classic Controls: First Part Runs 325
7. Hass Controls: Mazak
   1. Mazak Mill: Control Panel Overview 250
   2. Mazak Lathe: Control Panel Overview 255
   3. Mazak Mill: Locating Program 270
   4. Mazak Lathe: Locating Program 275
   5. Mazak Mill: Entering Offsets 280
   6. Mazak Lathe: Entering Offsets 285
   7. Creating EIA/ISO Program for the Mazak Mill 286
   8. Creating EIA/ISO Program for the Mazak Lathe 287
   9. Creating a Mazatrol Progrm for the Mill 288
   10. Creating a Mazatrol Program for the Lathe 289
   11. Mazak Mill: Program Execution 290
   12. Mazak Lathe: Program Execution 295
   13. Mazak Mill: Program Storage 310
   14. Mazak Lathe: Program Storage 315
   15. Mazak Mill: First Part Runs 320
   16. Mazak Lathe: Frist Part Runs 325
8. Composites
   1. Safety for Composite Processing 115
   2. Overview of Composite Processes 120
   3. Traditional Composites 125
   4. Advanced Thermoset Resins for Composites 130
   5. Advanced Materials for Composites 135
   6. Intro to Lay-up and Spray-up Molding 140
   7. Intro to Compression Molding 170
   8. Surface Finishing Composites 190
   9. Vacuum Bagging Technique: Single-sided Bagging 230
   10. Composite Inspection and Defect Prevention 240
   11. Repair Methods for Composites 250
9. Electrical Systems
   1. Electrical Units 101
   2. Safety for Electrical Work 111
   3. Introduction to Circuits 201
   4. Introduction to Magnetism 211
   5. DC Circuit Components 221
   6. NEC® Overview 231
   7. AC Fundamentals 241
   8. Electrical Instruments 251
   9. Electrical Print Reading 261
   10. DC Power Sources 271
   11. AC Power Sources 281
   12. Introduction to Semiconductors 283
   13. Conductor Selection 291
   14. Series Circuit Calculation 301
   15. Parallel Circuit Calculations 311
   16. Battery Selection 321
10. Fasteners
    1. Introduction to Assembly 101
    2. Intro to Fastener Ergonomics 130
    3. Properties for Fastener 200
    4. Safety for Assembly 211
    5. Introduction to Fastener Threads 221
    6. Overview of Threaded Fasteners 231
    7. Tools for Threaded Fasteners 235
    8. Overview of Non-Threaded Fasteners 241
    9. Understanding Torque 245
    10. Threaded Fastener Selection 255
11. Hydraulics and Pneumatics
    1. The Forces of Fluid Power 201
12. Inspection
    1. Basic Measurement 101
    2. Calibration Fundamentals 111
    3. Basics of Tolerance 121
    4. Blueprint Reading 131
    5. Hole Standards and Inspection 141
    6. Thread Standards and Inspection 151
    7. Surface Texture and Inspection 201
    8. Interpreting Prints 231
    9. Introduction to GD&T 301
    10. Major Rules of GD&T 311
    11. Inspecting a Prismatic Part 321
    12. Inspecting a Cylindrical Part 331
    13. Advanced Hole Inspection 341
    14. Inspecting with Optical Comparators 351
    15. Inspecting with CMM's 361
    16. In-Line Inspection Applications 381
13. Lean
    1. Continuous Process Improvement: Managing Flow 124
    2. Continuous Process Improvement: Identifying and Eliminating Waste 125
    3. Total Productive Maintenance 141
    4. 5S Overview 151
    5. Intro to Six Sigma 171
    6. Troubleshooting 181
    7. SPC Overview 211
    8. Metrics for Lean 231
    9. Process Flow Charting 241
    10. Strategies for Setup Reduction 251
    11. Management Tools: Product and Process Design 275
    12. Six sigma Goals and Tools 310
14. Manual Machining
    1. Manual Mill Basics 201
    2. Engine Lathe Basics 211
    3. Manual Mill Setup 231
    4. Manual Mill Operation 251
    5. Engine Lathe Operation 261
    6. Holemaking on the Manual Mill 271
    7. Threading on the Engine Lathe 311
    8. Taper Turning on the Engine Lathe 311
15. Materials
    1. Introduction to Physical Properties 101
    2. Introduction to Mechanical Properties 111
    3. Introduction to Metals 121
    4. Introduction to Plastics 131
    5. Introduction to Ceramics 141
    6. Introduction to Composites 151
    7. Introduction to Metal Manufacturing 180
    8. Classification of Steel 201
    9. Essentials of Heat Treatment of Steel 211
    10. Hardness Testing 221
    11. Ferrous Metals 231
    12. Nonferrous Metals 241
    13. Thermoplastics 251
    14. Thermosets 261
    15. Exotic Alloy 301
16. Mechanical Systems
    1. Forces of Machines 121
17. Metal Cutting
    1. Safety for Metal Cutting 101
    2. Cutting Processes 111
    3. Overview of Machine Tools 121
    4. Basic Cutting Theory 201
    5. Band Saw Operation 211
    6. Introduction to Metal Cutting Fluids 221
    7. Metal Cutting Fluid Safety 231
    8. Speed and Feed for the Mill 311
    9. Hard Turning 315
    10. Cutting Tool Materials 321
    11. Machining Titanium Alloys 325
    12. Carbide Grade Selection 331
    13. ANSI Insert Selection 341
    14. Lathe Tool Geometry 351
    15. Drill Tool Geometry 371
    16. Impact of Workpiece Materials 391
18. Motor Controls
    1. Relays, Contractors, and Motor Starters 201
    2. Control Devices 211
    3. Distribution Systems 221
    4. Limit Switches and Proximity Sensors 231
    5. Introduction to Electric Motors 301
    6. Symbols and Diagrams for Motors 311
    7. Logic and Line Diagrams 312
    8. DC Motor Applications 321
    9. AC Motor Applications 322
    10. Specs for Servomotors 330
    11. Solenoids 331
    12. Timers and Counters 340
    13. Reversing Motor Circuits 341
    14. Photonic Semiconductor Devices 355
    15. Photoelectric and Ultrasonic Devices 365
    16. Reduced Voltage Starting 370
    17. Solid-State Relays and Starters 375
    18. Deceleration Methods 380
    19. Acceleration Methods 385
19. PLC's
    1. Introduction to PLCs 201
    2. Hardware for PLCs 211
    3. Basics of Ladder Logic 221
    4. Numbering Systems and Codes 222
    5. PLC Input and Outputs 231
    6. Basic Programming for PLCs 241
    7. PLC Counters and Timers 251
    8. Networking for PLCs 261
    9. Hand-Held Programmers of PLCs 280
    10. PLC Diagrams and Programs 300
    11. Overview of PLC Registers 305
    12. PLC Program Control Instructions 310
    13. Math for PLCs 320
    14. Sequencer Instructions for PLCs 330
    15. PLC Installation Practices 340
20. PLCs: Siemens
    1. Basics of Siemens PLCs 200
    2. Siemens PLC Hardware 210
    3. Numbers, Codes, and Data Types for Siemens PLCs 220
    4. Siemens PLC Communication 230
    5. Siemens PLC Inputs and Outputs 240
    6. Siemens Human Machine Interfaces 250
    7. Siemens SIMATIC Modular PLCs 260
    8. Siemens PLC Programming Concepts 270
    9. Basic Ladder Diagram Programming for Siemens PLCs 280
    10. Basic Function Block Diagram Programming for Siemens PLCs 290
    11. Ladder Diagram Timers and Counters for Siemens PLCs 300
    12. Function Block Diagram Timers and Counters for Siemens PLCs 310
    13. Additional Ladder Diagram Instructions for Siemens PLCs 320
    14. Additional Function Block Diagram Instructions for Siemens PLCs 330
    15. Siemens SIMATIC S7-1200 PLCs 340
    16. Siemens SIMATIC S7-1500 PLCs 350
    17. Siemens Safety Integrated for Factory Automation 360
21. Quality
    1. ISO 9001:2015 Review 122
    2. Approaches to Maintenance 131
    3. Process Design and Development 133
    4. Process Design and Development 134
    5. Production System Design and Development 136
    6. Equipment/Tool Design and Development 137
22. Robotics
    1. Automated Systems and Controls 216
    2. Network Integration for Robot Workcells 376
23. Safety
    1. Introduction to OSHA 101
    2. Ergonomics 102
    3. Personal Protective Equipment 111
    4. Noise Reduction and Hearing Conversation 121
    5. Respiratory Safety 131
    6. Lockout/Tagout Procedures 141
    7. SDS and Hazard Communication 151
    8. Bloodborne Pathogens 161
    9. Walking and Working Surfaces 171
    10. Fire Safety and Prevention 181
    11. Flammable/Combustible Liquids 191
    12. Hand and Power Tool Safety 201
    13. Safety for Lifting Devices 211
    14. Powered Industrial Truck Safety 221
    15. Confined Spaces 231
    16. Environmental Safety Hazards 241
    17. Machine Guarding 271
24. Shop Essentials (Applied Mathematics)
    1. Math Fundamentals 101
    2. Applied and Engineering Sciences 110
    3. Math: Fractions and Decimals 111
    4. Units of Measurement 112
    5. Manufacturing Process Applications: Part I 124
    6. Manufacturing Process Applications: Part II 125
    7. Algebra Fundamentals 141
    8. Geometry: Triangles 161
    9. Geometry: Circles and Polygons 171
    10. Trigonometry: The Pythagorean Theorem 201
    11. Trigonometry: Sine, Cosine, Tangent 211
    12. Trigonometry: Sine Bar Applications 221
    13. Statistics 231
    14. Concepts of Calculus 310
25. Supervisor Essentials
    1. Essentials of Leadership 100
    2. Managing Performance: Best Practices 130
    3. Managing Performance: Corrective Actions 135
    4. Basics of Manufacturing Costs 140
    5. Conflict Resolution Principles 150
    6. Conflict Resolution for Different Groups 155
    7. Team Leadership 160
    8. Manufacturing Management 180
    9. Personal Effectiveness 190
    10. Managing the Diverse Workplace 210
    11. Performance Management and the Law 230
26. Welding
    1. Welding Safety Essentials 101
    2. PPE for Welding 111
    3. Welding Fumes and Gases Safety 121
    4. Electrical Safety for Welding 131
    5. Introduction to Welding 141
    6. Introduction to Welding Processes 151
    7. Math Fundamentals for Welding 161
    8. Geometry Fundamentals for Welding 171
    9. Material Tests for Welding 201
    10. Welding Ferrous Metals 211
    11. Welding Nonferrous Metals 212
    12. Overview of Weld Types 221
    13. Overview of Weld Defects 222
    14. Welding Symbols and Codes 231
    15. Fabrication Process 232
    16. Electrical Power for Arc Welding 241
    17. Introduction GMAW 251
    18. Introduction SMAW 252
    19. Introduction to FCAW 261
    20. Introduction to GTAW 262
    21. Overview of Soldering 271
    22. Thermal Cutting Overview 281
    23. Oxyfuel Cutting Applications 282
    24. Plasma Cutting 283
    25. Introduction to Automation 291
    26. GMAW Applications 301
    27. Advanced GMAW Applications 302
    28. BB.SMAW Applications 311
    29. FCAW Applicationsm321
    30. GTAW Applications 331
27. Workforce Essentials
    1. Essentials of Communication 115
28. Virtual Labs/Simulations (optional)
    1. Safety Awareness in Manufacturing
    2. Fire Safety
    3. 5S and Hand Tool Identification
    4. Inspecting Outer Diameters I
    5. Inspection Outer Diameters II
    6. Inspecting Groove Width
    7. Inspecting Thread Sizes
    8. Inspecting Inside Diameter
    9. Inspecting Depth
    10. Establishing Datums

What you will learn

• Six Sigma, 5S, Lean, and TPM
• Inspection Methods
• Metallurgy and Materials Science
• CNC Controls and Programming
• Programmable Logic Control and Programming
• Electrical Systems
• Fabrication and Assembly Processes
• Additive Manufacturing Processes
• Composite Processing
• Product, Process, and Production Design and Management

How you will benefit

• Prepare for a career as a tool and die maker, die maker, tool and die machinist, or toolmaker
• Gain confidence in your ability to perform your job
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This course trains for a career in plumbing. You will learn specialized plumbing skills and terminology for residential, commercial, and industrial plumbing systems. In addition, this course teaches the math, geometry, and physical principles needed to work on plumbing systems.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC, Mac, or Chromebook.

Software Requirements:

• PC: Windows 10 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.
• Access to state-wide plumbing codes is beneficial to building familiarity with the codebook.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

With an aging infrastructure and dwindling trade workforce, the demand for more skilled plumbers has never been greater. In fact, the U.S. Bureau of Labor Statistics predicts that plumbing and related jobs will increase at a faster-than-average rate, with roughly 43,000 openings expected annually through 2033. With the proper plumbing training, you could enter and build a scalable career in this high-demand field.

This Foundations of Plumbing course is perfect for teaching you the fundamental, job-ready skills relevant to the plumbing and piping industry. In this self-paced course, you will learn how to work on modern plumbing systems from in-depth course material developed by industry experts and employers. After completing this plumbing foundation course, you will possess the specialized skills and technical knowledge needed to start a career in plumbing.

1. Plumbing History, Codes, and Principles
2. Tools of the Plumbing Trade
3. First Aid and Safety
4. Basic Math for Plumbing
5. Water Supply, Water Sources, Waste Disposal, and Sewage Disposal
6. Mechanical Properties and Protection of Building Materials and Structure
7. Piping Materials Used in Plumbing Work
8. Joining Methods for DWV and Pressure Piping
9. Squares, Square Roots, and Basic Geometry
10. Plumbing Fixtures
11. Faucets and Related Devices
12. Valves
13. Water Heaters
14. Building Plans, Drawings, and Scale Rulers
15. Sketching
16. Communication and Skills Professionalism
17. Pipe Joining Techniques
18. Special Applications of Plastic Pipe and Fittings
19. Introduction to Welding
20. Soldering, Brazing, Cutting, and Gas Welding
21. Piping Materials, Sources, and Distribution for Potable Water
22. Water Pipe Sizing: Main-and-Branch and Individual Run Systems
23. Water Heaters and Hot Water Distribution
24. Cross-Connection Protection and Pipe Identification
25. Sewers & Sewage Disposal Methods
26. Drainage Fixture Units
27. Building Drains
28. Stacks
29. Applied Plumbing Mathematics
30. Applied Geometric Concepts
31. Properties of Water and Air
32. Venting Plumbing Drainage Systems
33. Sump Pumps, Sewage Pumps, and Sewage Ejectors
34. Plumbing Traps
35. Fixture Supports
36. Hoisting and Rigging
37. Safety Concepts
38. Rough-In Sheets, Single Line Drawings, and Isometric Drawings
39. Venting Plumbing Drainage Systems
40. Winning Customer Service
41. Customers Revealed
42. Customer Expectations
43. Customer Service: Why Do It?
44. The Decline (and Revival) of Customer Service
45. Moving Forward with the Four P's
46. Traits of Outstanding Customer Reps
47. Measuring Customer Service
48. Customer Service Communication
49. Helping Upset Customers

What you will learn

• Basic concepts of plumbing safety and the safety procedures for material and equipment use
• The function of components required for the construction of standard piping and water supply systems
• The use and meaning of specialty drawings associated with construction detail
• The application and installation of standard plumbing fixtures
• How to identify piping materials and fixture types used in plumbing work
• Methods to perform the essential math functions, calculations, and interpretation of the plumbing codes required to complete standard plumbing services

How you will benefit

• Obtain communication and active listening skills
• Gain skills to be more productive
• Acquire essential reasoning skills
• Learn wide knowledge of plumbing skills
• Possess the ability to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

Adam Seek

Adam Seek has more than 25 years of experience in the plumbing industry. He is a licensed plumber, pipefitter, instructor, and maintenance/service technician with an excellent track record of success in safety, quality control, planning, development, and project management. His career in plumbing started at a young age, when he first joined his family's plumbing business. He then went on to a four-year program where he was awarded for his aptitude and academic achievements.

This course will help you prepare for a career as a home inspector. You will learn best practices for inspecting residential construction, including inspection guidelines, identifying common defects, reporting methodologies, and risk management.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac. A PC is recommended because some features of the course may not work properly on a Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment. This also includes external references which you are encouraged to study.

The Home Inspection Certificate Course covers the principal components, procedures, and processes of home inspection. This course covers the principal components, procedures, and processes of home inspection. This course has also been approved by several home inspector regulatory boards for initial education requirements for home inspector licensure or continuing education credits. It is also one component of the steps required to obtain a NIBI Certified Inspector credential.

Through 11 in-depth modules, you will gain insight on the methodologies required to perform a home inspection. You will learn how to inspect and report on heating and cooling systems, plumbing and electrical systems, roof and siding, the foundation, and other major components of a home.

Please note: This course does not meet state requirements for AL, AZ, AR, CT, DE, IL, KY, LA, MD, MA, NV, NJ, NY, OH, OR, TX, WA, and WV. These states only accept 50% of online courses towards education, IN and VI.

1. Introduction
2. Roof Systems
3. Exterior Elements
4. Structural Systems
5. Insulation and Ventilation
6. Interior Elements
7. Electric Systems Lesson
8. Plumbing Systems
9. Heating Systems
10. Cooling Systems
11. Hot-water Supply Systems

What you will learn

• The purpose, scope, procedures, and standards of practice of a home inspection
• The methodologies involved in creating a home inspection report
• Residential construction materials and methods
• Basic residential construction materials and techniques
• Types of home inspection and personal protective equipment used by home inspectors
• To recognize common defects found in residential construction
• Appropriate reporting methodologies for creating a home inspection report

How you will benefit

• Build the knowledge base needed to complete home inspection exams
• Earn membership renewal credits or other continuing education credits
• Take the next step in the NIBI Certified Inspector credential process
• Receive a home inspection course certificate
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

Joseph Cummins

Joseph Cummins has worked in the home inspection industry since 1977. As Vice President of Technical Services for HouseMaster, a leading home inspection franchisor, he has been responsible for inspector training, risk management, reporting program development and technical support. He is the principle author of the NIBI Online Learning Program and numerous technical publications and has been instrumental in the development and implementation of technical training programs. Cummins is a graduate of the New Jersey Institute of Technology.

Joe Tangradi

Joe Tangradi started his career as a home inspector for HouseMaster's Central New Jersey franchise in 1993. From 2000 to 2007, he filled a position at HouseMaster providing training and support for HouseMaster franchisees and their inspectors. From 2007 to 2015, Joe held various roles for companies providing both commercial and residential construction and project management.

If you want to take your HVAC/R career to the next level, this course uses hands-on service call simulations to prepare you for industry-recognized HVAC Excellence or NATE certification.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC, Mac, or Chromebook.
• Optional simulations require a 64-bit operating system.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Microsoft Word Online.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

*Optional simulations are not screen reader or keyboard accessible. Simulation activities are not meant to be experienced on mobile devices. Personal computers should be used for these activities.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment. The following textbooks will be shipped to you approximately 7-10 business days after enrollment:

• Refrigeration & Air Conditioning Technology, by Silberstein, Obrzut, Tomczyk, Whitman, and Johnson.

The following material will be available online:

• Refrigeration & Air Conditioning Technology
• EPA Section 608 Preparatory Manual

Please note: You will receive a digital book if the physical book is on backorder.

If you have more than a year of HVAC/R experience, this course will prepare you for the next step—certification. HVAC/R technicians are in demand, but certified technicians can earn more and have better career opportunities.

This HVAC online training course is designed to equip you with the knowledge and skills to maintain and troubleshoot complex heating, air conditioning, and refrigeration systems. You will be provided with hands-on guidance through videos, reading assignments, service call simulations, and practical applications.

With content aligning to the latest industry standards, you will be prepared for the HVAC Excellence or NATE certification exams by the end of this course. You will also receive a voucher package to take the HVAC Excellence exams. However, please research your state's requirements prior to enrollment to ensure this course is the right fit for you.

Certification Exams

By course completion, you will be fully prepared to sit for the HVAC Excellence Core and Professional Technician exams, the NATE Core and Specialty Test exams, and the EPA 608 certification exam.

Upon completion of this course, you will receive an HVAC Excellence ESCO Group Voucher Package that includes:

• 1 Principals of Electrical and Refrigeration Theory (Core)* exam voucher
• 1 Professional Technician exam voucher (Residential Air Conditioning recommended)
• 1 EPA 608 exam voucher

*To sit for the HVAC Excellence Core exam, you must provide two years of documented work experience. Exam proctor fees may apply.

Additionally, this course aligns with the following Professional Technician specialty areas (vouchers are not included for the exams below):

• Principals of Electrical and Refrigeration Theory
• Residential Air Conditioning
• Gas Heat
• Electric Heat
• Heat Pump Installer
• Heat Pump Service
• Light Commercial Air Conditioning
• Light Commercial Refrigeration

*Proctor fees may apply

1. Introduction
1. Heat, Temperature, and Pressure
2. Matter and Energy
3. Refrigeration and Refrigerants
2. Safety, Tools and Equipment, and Shop Practices
1. General Safety Practices
2. Tools and Equipment
3. Fasteners
4. Tubing and Piping
5. Leak Detection, System Evacuation, and System Cleanup
6. Refrigeration and Oil Chemistry and Management – Recovery, Recycling, and Reclaiming, and Retrofitting
7. System Charging
8. Calibrating Instruments
9. Simulation: Safety Quiz
10. Simulation: Soft Skills Quiz
3. Automatic Controls
1. Basic Electricity and Magnetism
2. Introduction to Automatic Controls
3. Automatic Control Components and Applications
4. Troubleshooting Basic Controls
5. Advanced Automatic Controls-Direct Digital Controls (DDCs) and Pneumatics
4. Electric Motors
1. Types of Electric Motors
2. Application of Motors
3. Motor Controls
4. Troubleshooting Electric Motors
5. Commercial Refrigeration, Part 1
1. Evaporators and the Refrigeration System
2. Condensers
3. Compressors
6. Commercial Refrigeration, Part 2
1. Expansion Devices
2. Special Refrigeration Systems
3. Commercial Ice Machines
7. Commercial Refrigeration, Part 3
1. Special Refrigeration Applications
2. Troubleshooting and Typical Operating Conditions for Commercial Refrigeration
8. Air-Conditioning (Heating and Humidification)
1. Electric Heat
2. Gas Heat
3. Oil Heat
4. Hydronic Heat
5. Indoor Air Quality
9. Air-Conditioning (Cooling)
1. Comfort and Psychometrics
2. Refrigeration Applied to Air-Conditioning
3. Air Distribution and Balance
4. Installation
5. Residential Energy Auditing
6. Typical Conditions
7. Troubleshooting
10. All-Weather Systems
1. Heat Gains and Heat Losses in Structures
2. Air Source Heat Pumps
3. Geothermal Heat Pumps
11. Domestic Appliances
1. Domestic Refrigerators and Freezers
2. Room Air Conditioners
12. Commercial Air-Conditioning and Chilled-Water Systems
1. High-Pressure, Low-Pressure, and Absorption Chilled-Water Systems
2. Cooling Towers and Pumps
3. Operation, Maintenance, and Troubleshooting of Chilled-Water Air-Conditioning Systems
4. Commercial, Packaged Rooftop, Variable Refrigerant Flow, and Variable Air Volume Systems
13. Simulation Challenge Mode: HVAC
14. Simulation Challenge Mode: Electricity for HVAC
15. Soft Skills and the HVACR Technician
1. Communication
2. Decision-Making
3. Time Management
4. Problem Solving
5. Accepting Responsibility

What you will learn

• HVAC online training course
• Understand the procedures and criteria needed to conduct a residential energy audit
• Four basic components that make up the vapor-compression refrigeration cycle
• Functions and desired characteristics of system refrigerants
• Demonstrate piping operations typically performed by the air conditioning technician
• Properly installing and operating an air-conditioning system
• Latest advances and trends in green technology
• EPA laws governing safe refrigerant handling and transport
• Recovering, recycling, reclaiming, and retrofitting refrigerants

How you will benefit

• Be prepared to sit for the NATE Certification exams
• Be prepared to sit for the HVAC Excellence Certification exams
• Be prepared to sit for the EPA 608 Refrigerant Handling exam
• Use real-world simulations included in this course to get "hands-on" experience
• Soft skills simulations included in the course will help sharpen your customer service skills
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

Mike Baker

Mike Baker has been an instructor since 2011. Previously, he was HVAC Program Director at both Virginia College and Vista College. Baker was a HVAC technician for several decades and has experience hiring, training, and managing HVAC Technicians. He holds numerous HVAC Excellence certifications, several Green Mechanical Council certifications, an EPA 608 Universal certification, and Emerson Climate Technology certifications. He has served as both an HVAC Excellence Instructor and Exam Proctor.

Work through true-to-life simulations of common HVAC/R scenarios and gain applicable service, maintenance, and troubleshooting skills. This hands-on simulator course will help you hone your technical abilities and build your knowledge of complex heating, ventilation, air conditioning, and refrigeration systems.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.
• A microphone.
• A webcam.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

As HVAC/R systems become increasingly complex, learning and mastering the latest technology is critical. HVAC/R Simulations for Field Technicians offers a rich, hands-on learning experience that mimics field performance in a completely online environment. You will practice servicing, maintaining, and troubleshooting common HVAC/R scenarios in true-to-life service call simulations.

You will work through approximately 200 scenarios to master seven pieces of HVAC/R equipment – Gas Furnace, Oil Furnace, Gas Boiler, Split Residential A/C, Commercial A/C, Heat Pumps, and Commercial Walk-in Freezers. Your skills and knowledge are then put to the test in 12 ungraded assessment simulations. If you need to sharpen your diagnostic and troubleshooting skills, this online course is ideal.

Please note this course is not graded by an instructor and no grades will be awarded upon the completion. For the certificate of completion to be provided, you must verify that you have completed all simulations to the best of your ability.

1. Safety, Tools and Equipment, and Shop Practices
2. Basic Electricity and Magnetism
3. Types of Electric Motors
4. Troubleshooting Electric Motors
5. Condensers
6. Special Refrigeration Systems Components
7. Applications of Refrigeration Systems
8. Troubleshooting and Typical Operating Conditions for Commercial Refrigeration
9. Gas Heat
10. Oil Heat
11. Hydronic Heat
12. Typical Operations Conditions
13. Troubleshooting
14. Air Source Heat Pumps
15. Room Air Conditioner
16. Challenge Mode Simulations

What you will learn

• Measure voltage, current, and resistance in electric circuits
• Properly install an air-conditioning system and put it into operation
• Troubleshoot mechanical problems in an air-conditioning system
• Troubleshoot electrical problems in an air-conditioning system
• Troubleshoot electrical and mechanical problems in heat pump systems

How you will benefit

• The use of simulations allows you to get as close to "real world" troubleshooting scenarios as possible without an actual HVAC/R unit or system
• The scenarios may be repeated as many times as needed to hone troubleshooting and problem-solving skills
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

Mike Baker

Mike Baker has been an instructor since 2011. Previously, he was HVAC Program Director at both Virginia College and Vista College. Baker was a HVAC technician for several decades and has experience hiring, training, and managing HVAC Technicians. He holds numerous HVAC Excellence certifications, several Green Mechanical Council certifications, an EPA 608 Universal certification, and Emerson Climate Technology certifications. He has served as both an HVAC Excellence Instructor and Exam Proctor.

This course will train you to service, maintain, and troubleshoot complex heating, ventilation, air conditioning, and refrigeration systems. You will gain the necessary situational knowledge and technical skills to prepare you for an entry-level role in the HVAC/R field.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC, Mac, or Chromebook.
• Optional simulations require a 64-bit operating system

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Microsoft Word Online
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

*Optional simulations are not screen reader or keyboard accessible. Simulation activities are not meant to be experienced on mobile devices. Personal computers should be used for these activities.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment. The following textbooks will be shipped to you approximately 7-10 business days after enrollment:

• Refrigeration & Air Conditioning Technology, by Silberstein, Obrzut, Tomczyk, Whitman, and Johnson.

The following material will be available online:

• Refrigeration & Air Conditioning TechnologyPDF
• EPA Section 608 Preparatory Manual - Optional Resource

Please note: You will receive a digital book if the physical book is on backorder.

This online HVAC/R training course will prepare you for an entry-level career in the HVAC/R industry by providing hands-on guidance for service, repair, and solutions.

During this HVAC/R certification program, you will learn from in-depth materials to understand HVAC/R service and repair, environmental challenges and solutions, and service call simulations that bring concepts to life.

From safety, tools, and equipment best practices to commercial and residential appliance fundamentals—this HVAC/R technician course is designed to help you succeed in your new career. You will thoroughly understand key HVAC/R topics, including heat, temperature and pressure, refrigeration and refrigerants, safety practices, tools and equipment, leak detection, system evacuation, refrigeration oil management, system charging, automatic controls, electric motors, and much more. Reinforce your learning by engaging in over 200 course simulations and challenges to test your knowledge and skills.

This HVAC/R technician course also emphasizes the importance of soft skills such as communication, decision-making, time management, problem-solving, and accepting responsibility.

At the completion of your HVAC/R training, you will be ready to pass 20+ HVAC Excellence Employment Ready Certificates, the EPA 608, and the NATE Ready to Work Certificate. A voucher package is included with your HVAC/R certification enrollment, which includes the HVAC Excellence Employment Ready Certificate exam and the EPA 608 Certification exam. Please research your state's requirements prior to enrollment to ensure this HVAC technician course is the right fit for you.

HVAC/R Certification Exams

This HVAC/R certified technician program will provide the necessary information to pass the following entry-level certificate exams:

• HVAC Excellence ESCO Group: 20+ Employment Ready Certificates
• NATE: Ready to Work Certificate
• EPA 608: Section 608 Universal Technician Certification

Upon completion of this HVAC/R training, you will also receive a voucher package for the HVAC Excellence Employment Ready Certificate exam* that includes:

• 1 Employment Ready Certificate for Electrical
• 1 Employment Ready Certificate for Air Conditioning
• 1 EPA 608 Voucher

*Proctor fees may apply

1. Introduction
1. Heat, Temperature, and Pressure
2. Matter and Energy
3. Refrigeration and Refrigerants
2. Safety, Tools and Equipment, and Shop Practices
1. General Safety Practices
2. Tools and Equipment
3. Fasteners
4. Tubing and Piping
5. Leak Detection, System Evacuation, and System Cleanup
6. Refrigeration and Oil Chemistry and Management – Recovery, Recycling, and Reclaiming, and Retrofitting
7. System Charging
8. Calibrating Instruments
9. Simulation: Safety Quiz
10. Simulation: Soft Skills Quiz
3. Automatic Controls
1. Basic Electricity and Magnetism
2. Introduction to Automatic Controls
3. Automatic Control Components and Applications
4. Troubleshooting Basic Controls
5. Advanced Automatic Controls-Direct Digital Controls (DDCs) and Pneumatics
4. Electric Motors
1. Types of Electric Motors
2. Application of Motors
3. Motor Controls
4. Troubleshooting Electric Motors
5. Commercial Refrigeration, Part 1
1. Evaporators and the Refrigeration System
2. Condensers
3. Compressors
6. Commercial Refrigeration, Part 2
1. Expansion Devices
2. Special Refrigeration Systems
3. Commercial Ice Machines
7. Commercial Refrigeration, Part 3
1. Special Refrigeration Applications
2. Troubleshooting and Typical Operating Conditions for Commercial Refrigeration
8. Air-Conditioning (Heating and Humidification)
1. Electric Heat
2. Gas Heat
3. Oil Heat
4. Hydronic Heat
5. Indoor Air Quality
9. Air-Conditioning (Cooling)
1. Comfort and Psychometrics
2. Refrigeration Applied to Air-Conditioning
3. Air Distribution and Balance
4. Installation
5. Residential Energy Auditing
6. Typical Conditions
7. Troubleshooting
10. All-Weather Systems
1. Heat Gains and Heat Losses in Structures
2. Air Source Heat Pumps
3. Geothermal Heat Pumps
11. Domestic Appliances
1. Domestic Refrigerators and Freezers
2. Room Air Conditioners
12. Commercial Air-Conditioning and Chilled-Water Systems
1. High-Pressure, Low-Pressure, and Absorption Chilled-Water Systems
2. Cooling Towers and Pumps
3. Operation, Maintenance, and Troubleshooting of Chilled-Water Air-Conditioning Systems
4. Commercial, Packaged Rooftop, Variable Refrigerant Flow, and Variable Air Volume Systems
13. Simulation Challenge Mode: HVAC
14. Simulation Challenge Mode: Electricity for HVAC
15. Soft Skills and the HVACR Technician
1. Communication
2. Decision-Making
3. Time Management
4. Problem Solving
5. Accepting Responsibility

What you will learn

• Watch our HVAC/R certified technician program video overview to see how real-world scenarios and simulations will be applied in your learnings
• Explain the concepts of heat transfer, BTU, temperature, heat content, sensible heat, latent heat, pressure, gas laws, and work, and describe how they apply to air conditioning and refrigeration systems
• Describe the four basic components that make up the vapor-compression refrigeration cycle
• Identify the four major system components and explain their functions in the refrigeration system
• Properly install an air-conditioning system and put it into operation
• Troubleshoot mechanical and electrical problems in an air-conditioning and heat pump systems

How you will benefit

• Become prepared to sit for the NATE Ready to Work Certificate exams
• Become prepared to sit for the HVAC Excellence Employment Ready Certificate Exams
• Become prepared to sit for the EPA 608 Refrigerant Handling Certification Exam
• Use real-world simulations included in this program to get hands-on HVAC/R training
• Discover soft skills simulations included in the course that will help sharpen your customer service skills
• Attend exclusive annual virtual National Apprenticeship Week events featuring live webinars, workshops, and employer interactions

Mike Baker

Mike Baker has been an instructor since 2011. Previously, he was HVAC Program Director at both Virginia College and Vista College. Baker was a HVAC technician for several decades and has experience hiring, training, and managing HVAC Technicians. He holds numerous HVAC Excellence certifications, several Green Mechanical Council certifications, an EPA 608 Universal certification, and Emerson Climate Technology certifications. He has served as both an HVAC Excellence Instructor and Exam Proctor.

This online Leadership in Energy & Environmental Design (LEED) course is designed to educate candidates on cutting edge green building and sustainable design practices and enables participants to designate that expertise with an internationally recognized professional credential.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Software must be installed and fully operational before the course begins.
• Adobe Acrobat Reader.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

The Leadership in Energy & Environmental Design (LEED) Green Associate course is designed to educate candidates on the cutting edge green building and sustainable design practices, and enables participants to designate that expertise with an internationally recognized professional credential.

Developed and backed by the U.S. Green Building Council, the LEED Green Associate course and its credential have gained national and global notoriety. The Leadership in Energy and Environmental Design (LEED) rating system is one of the most widely used standards for green building and design. The Tier 1: LEED Green Associate training course and exam covers general information on green building practices for residential and commercial projects, and prepares individuals to support other professionals working on projects seeking LEED certification.

This course will also prepare you for the LEED Green Associate Credential from USGBC (US Green Building Council). This is an internationally recognized certification that designates expertise in green building and design principles. The exam fee is included with the course.

1. Introduction to Sustainability
   1. Defining sustainability
   2. Recognizing why sustainable building practices are important
2. Integrative Strategies
   1. Integrative design process - early analysis of the interrelationships among systems; systems thinking; charettes
   2. Integrative project team members - architect, engineer, landscape architect, civil engineer, contractor, facility manager, etc.
   3. Standards that support LEED - American Society of Heating, Refrigeration and Air-conditioning Engineers [ASHRAE]; Sheet Metal and Air Conditioning Contractors National Association [SMACNA] guidelines; Green Seal, ENERGY STAR®, HERs, Reference Standards listed in ACPs, etc.
3. Introduction to LEED
   1. USGBC®/GBCI
   2. Structure of LEED rating systems - credit categories, prerequisites, credits and/or Minimum Program Requirements for LEED Certification
   3. LEED v4 vs. LEED 2009
   4. Scope of each LEED rating system - rating system selection; rating system families [BD+C, ID+C, O+M, ND, Homes]
   5. LEED development process - consensus based; stakeholder and volunteer involvement; rating system updates/evolution
   6. Credit categories - goals and objectives of each and synergies
   7. Impact categories - what should a LEED project accomplish?
   8. LEED certification process - certification levels [Certified, Silver, Gold, Platinum]; LEED Scorecard; 3rd party verification; role of documentation submission; LEED Interpretations; Addenda; awareness of different system versions; Components of LEED Online and Project Registration
   9. Other rating systems – what other green building rating systems are out there?
4. Location and Transportation
   1. Site selection - targeting sites in previously developed and brownfields/high-priority designation area, avoiding sensitive habitat, located in areas with existing infrastructure and nearby uses, reduction in parking footprint
   2. Alternative transportation - type, access, and quality; infrastructure and design
5. Sustainable Sites
   1. Site assessment - environmental assessment, human impact;
   2. Site design and development - construction activity pollution prevention; habitat conservation and restoration; exterior open space; rainwater management; exterior lighting; heat island reduction
6. Water Efficiency
   1. Outdoor water use - use of graywater/rainwater in irrigation; use of native and adaptive species
   2. Indoor water use - concepts of low flow/waterless fixtures; water-efficient appliances
   3. Water performance management - measurement and monitoring
7. Energy and Atmosphere
   1. Building loads - building components, space usage [private office; individual space; shared multi-occupant spaces]
   2. Energy efficiency - design, operational energy efficiency, commissioning, energy auditing
   3. Alternative and renewable energy practices - demand response, renewable energy, green power, carbon offsets
   4. Energy performance management - energy use measurement and monitoring; building automation controls/advanced energy metering; operations and management; benchmarking; ENERGY STAR®
   5. Environmental concerns - sources and energy resources; greenhouse gases; global warming potential; resource depletion; ozone depletion
8. Materials and Resources
   1. Reuse - building reuse, material reuse, interior reuse, furniture reuse
   2. Life-cycle impacts - concept of life-cycle assessment; material attributes; human and ecological health impacts; design for flexibility
   3. Waste - construction and demolition; maintenance and renovation; operations and ongoing; waste management plan
   4. Purchasing and declarations - purchasing policies and plans; environmental preferable purchasing (EPP); building product disclosure and optimization [i.e., raw materials sourcing; material ingredients; environmental product disclosure]
9. Indoor Environmental Quality
   1. Indoor air quality - ventilation levels; tobacco smoke control; management of and improvements to indoor air quality; low-emitting materials; green cleaning; integrated pest management
   2. Lighting - electric lighting quality, daylight
   3. Sound - acoustics
   4. Occupant comfort, health, and satisfaction - controllability of systems, thermal comfort design, quality of views, assessment/survey
10. Project Surroundings and Public Outreach
    1. Environmental impacts of the built environment - energy and resource use in conventional buildings; necessity of green buildings; environmental externalities; triple bottom line
    2. Codes - relationship between LEED® and codes [building, plumbing, electrical, mechanical, fire protection]; green building codes
    3. Values of sustainable design - energy savings over time; healthier occupants; money-saving incentives; costs [hard costs, soft costs]; life-cycle
    4. Regional design - regional green design and construction measures as appropriate, regional emphasis should be placed in Sustainable Sites and Materials & Resources
    5. Exam Tips and Logistics
    6. Credentialing Exam

What you will learn

• Understand LEED & the process of getting a building LEED certified
• Learn what is expected of a LEED Green Associate
• Know what material to study and prepare for the LEED Green Associate Exam administered by USGBC
• Be prepared to contribute to the health, safety, well-being, and productivity of the community at large by implementing best practices as it relates to sustainable design.

How you will benefit

• Accreditation can be a stepping-stone to new contacts and new opportunities for success in the green building and design fields
• Learn the steps to implement more sustainable, eco-friendly, and energy-efficient practices
• Designate your green building expertise with an internationally recognized credential
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

Jean Cipriano

Jean Cipriano has been the principal of her own firm for over 25 years and has consulted on projects for major corporations and universities. She infuses her work with awareness and regard for the environment and applies this philosophy to the inhabitants of the buildings she designs. As a LEED AP, she has instructed adults in all aspects of interior architecture. Cipriano holds a bachelor's degree in Interior Architecture and is a member of ASID.

This Maintenance Technician training course allows you to identify the required knowledge and skills that provide a pathway to upskill and validated worker competences.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Do you have a knack for tinkering and fixing things with your hands? Are you looking for a career where you can do what you love every day? This online course includes an intensive overview of the skills required for manufacturing maintenance, including the principles of power transfer and rigging safety as well as PLCs and robotics, and will provide you with the knowledge and skills you need to begin a successful career.

A Maintenance Technician is required to have a thorough understanding of how machines and systems function to keep them running without breakdowns and maintain service for their expected lifespan and beyond. You will learn about workholding, math, inspection, safety, machining, quality, grinding, electrical systems, automation, mechanical systems, motor controls, rigging, and fluid systems as you prepare for your new career as a Maintenance Technician.

1. Abrasives
   1. Grinding Processes 201
   2. Grinding Safety 211
   3. Basic Grinding Theory 221
   4. Basics of the Surface Grinder 231
   5. Basics of the Cylindrical Grinder 232
   6. Basics of the Centerless Grinder 233
   7. Setup for the Surface Grinder 241
   8. Setup for the Cylindrical Grinder 242
   9. Setup for the Centerless Grinder 243
   10. Surface Grinder Operation 251
   11. Cylindrical Grinder Operation 252
   12. Centerless Grinder Operation 253
   13. Introduction to Grinding Fluids 261
   14. Grinding Variables 301
   15. Grinding Nonferrous Materials 321
   16. Grinding Wheel Materials 331
   17. Dressing and Truing 341
   18. Grinding Wheel Selection 351
   19. Grinding Wheel Geometry 361
2. CNC
   1. Basics of the CNC Lathe 211
   2. Basics of the CNC Mill 212
3. Electrical Systems
   1. Electrical Units 101
   2. Safety for Electrical Work 111
   3. Introduction to Circuits 201
   4. Introduction to Magnetism 211
   5. DC Circuit Components 221
   6. NEC(R) Overview 231
   7. AC Fundamentals 241
   8. Electrical Instruments 251
   9. Electrical Print Reading 261
   10. DC Power Sources 271
   11. AC Power Sources 281
   12. Conductor Selection 291
   13. Series Circuit Calculations 301
   14. Parallel Circuit Calculations 311
   15. Battery Selection 321
4. Fasteners
   1. Intro to Fastener Ergonomics 130
   2. Properties for Fasteners 200
   3. Introduction to Fastener Threads 221
   4. Overview of Threaded Fasteners 231
   5. Tools for Threaded Fasteners 235
   6. Overview of Non-Threaded Fasteners 241
   7. Understanding Torque 245
   8. Threaded Fastener Selection 255
5. Hydraulics and Pneumatics
   1. Introduction to Fluid Systems 101
   2. The Forces of Fluid Power 201
   3. Safety for Hydraulic and Pneumatics 211
   4. Introduction to Hydraulic Components 221
   5. Introduction to Pneumatic Components 231
   6. Introduction to Fluid Conductors 241
   7. Fittings for Fluid Systems 251
   8. Preventative Maintenance for Fluid Systems 261
   9. Hydraulic Power Variables 301
   10. Hydraulic Power Sources 302
   11. Pneumatic Power Variables 311
   12. Pneumatic Power Sources 312
   13. Hydraulic Control Values 341
   14. Hydraulic Schematics and Basic Circuit Design 342
   15. Pneumatic Control Valves 351
   16. Pneumatic Schematics and Basic Circuit Design 352
   17. Actuator Applications 361
   18. Hydraulic Fluid Selection 371
   19. Contamination and Filter Selection 381
   20. Hydraulic Principles and System Design 391
6. Inspection
   1. Basic Measurement 101
   2. Calibration Fundamentals 111
   3. Basics of Tolerance 121
   4. Blueprint Reading 131
   5. Hole Standards and Inspection 141
   6. Thread Standards and Inspection 151
   7. Surface Texture and Inspection 201
   8. Interpreting Prints 231
   9. Introduction to GD&T 301
   10. Major Rules GD&T 311
   11. Inspecting a Prismatic Part 321
   12. Inspecting a Cylindrical Part 331
   13. Advanced Hole Inspection 341
   14. Inspecting with Optical Comparators 351
   15. Inspecting with CMMs 361
   16. Calibration and Documentation 371
   17. In-Line Inspection Applications 381
7. Lean
   1. Lean Manufacturing Overview 101
   2. Continuous Process Improvement: Managing Flow 124
   3. Continuous Process Improvement: Identifying and Eliminating Waste 125
   4. Total Productive Maintenance 141
   5. 5S Overview 151
   6. Intro to Six Sigma 171
   7. Troubleshooting 181
   8. Conducting Kaizen Events 191
   9. SPC Overview 211
   10. Metrics for Lean 231
   11. Process Flow Charting 241
   12. Strategies for Setup Reduction 251
   13. Management Tools: Problem Solving 270
   14. Six Sigma Goals and Tools 310
8. Manual Machining
   1. Manual Mill Basics 201
   2. Engine Lathe Basics 211
   3. Manual Mill Stup 2311
   4. Benchwork and Layout Operations 241
   5. Manual Mill Operation 251
   6. Engine Lathe Operation 261
   7. Holemaking on the Manual Mill 271
   8. Threading on the Engine Lathe 301
   9. Taper Turning on the Engine Lathe 311
9. Materials
   1. Hardness Testing 221
10. Mechanical Systems
    1. Introduction to Mechanical Systems 101
    2. Safety for mechanical Work 111
    3. Forces of Machines 121
    4. Power Transmission Components 201
    5. Mechanical Power Variables 202
    6. Lubricant Fundamentals 211
    7. Bearing Applications 221
    8. Spring Applications 231
    9. Belt Drive Applications 241
    10. Gear Applications 251
    11. Gear Geometry 261
    12. Clutch and Brake Applications 271
11. Metal Cutting
    1. Safety for Metal Cutting 101
    2. Cutting Processes 111
    3. Overview of machine Tools 121
    4. Basic Cutting Theory 201
    5. Band Saw Operation 211
    6. Introduction to Metal Cutting Fluids 221
    7. Limit Switches and Proximity Sensors 231
    8. Introduction to Electric Motors 301
    9. Symbols and Diagrams for Motors 311
    10. Logic and Line Diagrams 312
12. PLCs
    1. Introduction to PLCs 201
    2. Hardware for PLCs 211
    3. PLC Inputs and Outputs 231
    4. Hand-Held Programmers of PLCs 280
    5. Overview of PLC Registers 305
13. PLCs: Siemens
    1. Basics of Siemens PLCs 200
    2. Siemens PLC Hardware 210
    3. Siemens PLC Inputs and Outputs 240
    4. Siemens Human Machine Interfaces 250
    5. Siemens SIMATIC Modular PLCs 260
    6. Siemens SIMATIC S7-1200 PLCs 340
    7. Siemens SIMATIC S7-1500 PLCs 350
    8. Siemens Safety Integrated for Factory Automation 360
14. Quality
    1. ISO 9001:2015 Review 122
    2. Approaches to Maintenance 131
    3. Customer-Focused Quality 155
    4. TS 16949:2009 Overview 221
15. Rigging
    1. Introduction to Machine Rigging 111
    2. Rigging Equipment 121
    3. Rigging Inspection and Safety 131
    4. Lifting an Moving Equipment 141
    5. Rigging Mechanics 220
16. Robotics
    1. Robot Troubleshooting 331
    2. Robot Maintenance 355
    3. Robot Installations 370
17. Safety
    1. Introduction to OSHA 101
    2. Ergonomics 102
    3. Personal Protective Equipment 111
    4. Noise Reduction and Hearing Conservation 121
    5. Respiratory Safety 131
    6. Lockout/Tagout Procedures 141
    7. SDS and Hazard Communication 151
    8. Bloodborne Pathogens 161
    9. Walking and Working Surfaces 171
    10. Fire and Safety and Prevention 181
    11. Flammable/Combustible Liquids 191
    12. Hand and Power tool Safety 201
    13. Safety for Lifting Devices 211
    14. Powered Industrial Truck Safety 221
    15. Confined Spaces 231
    16. Environmental Safety Hazards 241
    17. Machine Guarding 271
18. Shop Essentials (Applied Mathematics)
    1. Math Fundamentals 101
    2. Math Fractions and Decimals 111
    3. Units of Measurement 112
    4. Manufacturing Process Applications: Part I 124
    5. Manufacturing Process Applications: Part II 125
    6. Geometry: Lines and angles 151
    7. Geometry: Triangles 161
    8. Geometry: Circles and Polygons 171
    9. Trigonometry: The Pythagorean Theorem 201
    10. Trigonometry: Sine, Cosine, Tangent 211
    11. Statistics 231
19. Supervisor Essentials
    1. Essentials of Leadership 100
    2. Managing Performance: Best Practices 130
    3. Managing Performance: Corrective Actions 135
    4. Conflict Resolution Principles 150
    5. Conflict Resolution for Different Groups 155
    6. Team Leadership 160
    7. Manufacturing Management 180
    8. Personal Effectiveness 190
    9. Managing the Diverse Workplace 210
    10. Harassment and Discrimination 215
    11. Performance Management and the Law 230
20. Welding
    1. Welding Safety Essentials 101
    2. PPE for Welding 111
    3. Welding Fumes and Gases Safety 121
    4. Electrical Safety for Welding 131
    5. Introduction to Welding 141
    6. Introduction to Welding Processes 151
    7. Math Fundamentals for Welding 161
    8. Geometry Fundamentals for Welding 171
    9. Material Tests for Welding 201
    10. Welding Ferrous Metals 211
    11. Welding Nonferrous Metals 212
    12. Overview of Weld Types 221
    13. Overview of Weld Defects 222
    14. Welding Symbols and Codes 231
    15. Fabrication Process 232
    16. Electrical Power for Arc Welding 241
    17. Introduction to GMAW 251
    18. Introduction to SMAW 252
    19. Introduction to FCAW 261
    20. Introduction to GTAW 262
    21. Overview of Soldering 271
    22. Thermal Cutting Overview 281
    23. Oxyfuel Cutting Applications 282
    24. Plasma Cutting 283
    25. Introduction to Automation 291
    26. GMAW Applications 301
    27. Advanced GMAW Applications 302
    28. SMAW Applications 311
    29. FCAW Applications 321
    30. GTAW Applications 331
    31. Essentials of Communication 115
    32. Introduction to Workholding 101
    33. Supporting and Locating Principles 111
    34. Locating Devices 121
    35. Clamping Basics 131
    36. Chucks, Collets, and Vises 141
    37. Fixture Body Construction 200
    38. Fixture Design Basics 201
    39. Drill Brushing Selection 230
21. Virtual Labs/Simulations (optional)
    1. Safety Awareness in Manufacturing
    2. Fire Safety
    3. 5S and Hand Tool Identification
    4. Rigging Equipment Safety and Inspection
    5. Power Tool Safety
    6. Safety for Lifting and Moving Devices
    7. Lockout Tagout Procedures
    8. Assembly with Mechanical Fasteners
    9. Testing an AC Induction Motor with Multimeter
    10. Hand Tool Safety
    11. Voltage Checks for a Variable Frequency Drive Panel

What you will learn

• Troubleshooting
• Six Sigma, 5S, Lean, and TPM
• Inspection Methods
• PLC Equipment and Communication
• Electrical, Mechanical, and Fluid Systems
• Robot Maintenance and Installation
• Fabrication and Assembly Processes
• Workholding Principles

How you will benefit

• Prepare for a career as a maintenance technician, maintenance mechanic, equipment engineering technician, facilities manager, maintenance engineer
• Gain confidence in your ability to perform your job
• Develop the knowledge and skills you need to start your career
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This Manual Machinist course provides an intensive overview of the skills necessary to perform manual machining. The course will cover workholding, math, inspection, safety, machining, materials, quality, grinding, assembly, and more.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Manufacturers are looking for highly skilled workers to create increasingly complex and important products. If you're looking for a stable career in a growing industry, becoming a manual machinist could be the best option for you. This online Manual Machinist course will provide you with the knowledge and skills you need to prove competency and begin your new career quickly.

The Manual Machinist course provides an intensive overview of the skills necessary to perform manual machining. You will learn workholding, math, inspection, safety, machining, materials, quality, grinding, and assembly to work as a Manual Machinist.

1. Abrasives
   1. Grinding Processes 201
   2. Grinding Safety 211
   3. Basic Grinding Theory 221
   4. Basics of the Surface Grinder 231
   5. Basics of the Cylindrical Grinder 232
   6. Basics of the Centerless Grinder 233
   7. Setup for the Surface Grinder 241
   8. Setup for the Cylindrical Grinder 242
   9. Setup for the Centerless Grinder 243
   10. Surface Grinder Operation 251
   11. Cylindrical Grinder Operation 252
   12. Centerless Grinder Operation 253
   13. Grinding Ferrous Metals 311
   14. Grinding Nonferrous Metals 321
   15. Grinding Wheel Materials 331
   16. Dressing and Truing 341
   17. Grinding Wheel Geometry 361
2. CNC
   1. Introduction to CNC Machines 201
   2. Basics of the CNC Lathe 211
   3. Basics of the CNC Mill 212
   4. Coordinates for the CNC Lathe 221
   5. Coordinates for the CNC Mill 222
   6. Basics of G Code Programming 231
   7. Introduction to CAD and CAM for Machining 241
   8. Control Panel Functions for the CNC Lathe 251
   9. Control Panel Functions for the CNC Mill 252
   10. Offsets on the CNC Lathe 261
   11. Offsets on the CNC Mill 262
   12. Creating a CNC Turning Program 301
   13. Creating a CNC Milling Program 302
   14. Calculations for Programming the Lathe 311
   15. Calculations for Programming the Mill 312
   16. Canned Cycles for the Lathe 321
   17. Canned Cycles for the Mill 322
3. CNC Controls: Fanuc
   1. Fanuc Mill: Control Panel Overview 250
   2. Fanuc Lathe: Control Panel Overview 255
   3. Fanuc Mill: Entering Offsets 260
   4. Fanuc Lathe: Entering Offsets 265
   5. Fanuc Mill: Locating Program Zero 270
   6. Fanuc Lathe: Locating Program 275
   7. Fanuc Mill: Program Execution 280
   8. Fanuc Lathe: Program Execution 285
   9. Haas Mill Classic Controls: Program Storage 310
   10. Haas Lathe Classic Controls: Program Storage 325
4. CNC Controls: Haas
   1. Haas Mill: Classic Control Panel Overview 250
   2. Haas Lathe Classic Control Panel Overview 256
   3. Haas Mill Classic Controls: Entering Offsets 260
   4. Haas Lathe Classic Controls: Entering Offsets 265
   5. Haas Mill Classic Controls: Locating Program Zero 270
   6. Haas Lathe Classic Controls: Locating Program Zero 275
   7. Haas Mill Classic Controls: Program Execution 280
   8. Haas Lathe Classic Controls: Program Execution 285
   9. Hass Mill Classic Controls: Program Storage 310
   10. Haas Lathe Classic Controls: Program Storage 315
   11. Hass Mill Classic Controls: First Part Runs 320
   12. Haas Lathe Classic Controls: First Part Runs 325
5. CNC Controls: Mazak
   1. Mazak Mill: Control Panel Overview 250
   2. Mazak Lathe: Control Panel Overview 255
   3. Mazak Mill: Locating Program Zero 270
   4. Mazak Lathe: Locating Program Zero 275
   5. Mazak Mill: Entering Offsets 280
   6. Mazak Lathe: Entering Offsets 285
   7. Creating EIA/ISO Program for the Mazak Mill 286
   8. Creating EIA/ISO Program for the Mazak Lathe 287
   9. Creating Mazatrol Program for the Mill 288
   10. Creating Mazatrol Program for the Lathe 289
   11. Mazak Mill: Program Execution 290
   12. Mazak Lathe: Program Execution 295
   13. Mazak Mill: Program Storage 310
   14. Mazak Lathe: Program Storage 315
   15. Mazak Mill: First Part Runs 320
   16. Mazak Lathe: First Part Runs 325
6. Electrical Systems
   1. Safety for Electrical Work 111
7. Fasteners
   1. Intro to Fastener Ergonomics 130
   2. Properties for Fasteners 200
   3. Introduction to Fastener Threads 221
   4. Overview of Threaded Fasteners 231
   5. Tools for Threaded Fasteners 235
   6. Overview of Non-Threaded Fasteners 241
   7. Understanding Torque 245
   8. Threaded Fastener Selection 255
8. Inspection
   1. Basic Measurement 101
   2. Calibration Fundamentals 111
   3. Basics of Tolerance 121
   4. Blueprint Reading 131
   5. Hole Standards and Inspection 141
   6. Thread Standards and Inspection 151
   7. Surface Texture and Inspection 201
   8. Interpreting Prints 231
   9. Introduction to GD&T 301
   10. Major Rules of GD&T 311
   11. Inspecting a Prismatic Part 321
   12. Inspecting a Cylindrical Part 331
   13. Advanced Hole Inspection 341
   14. Inspecting with Optical Comparators 351
   15. Inspecting with CMMs 361
   16. Calibration and Documentation 371
9. Lean
   1. Lean Manufacturing Overview 101
   2. Continuous Process Improvement: Managing Flow 124
   3. Continuous Process Improvement: Identifying and Eliminating Waste 125
   4. Total Productive Maintenance 141
   5. 5S Overview 151
   6. Intro to Six Sigma 171
   7. Troubleshooting 181
   8. SPC Overview 211
   9. Metrics for Lean 231
   10. Process Flow Charting 241
   11. Strategies for Setup Reduction 251
   12. Six Sigma Goals and Tools 310
10. Manual Machining
    1. Manual Mill Basics 201
    2. Engine Lathe Basics 211
    3. Manual Mill Setup 221
    4. Engine Lathe Setup 231
    5. Benchwork and Layout Operations 241
    6. Manual Mill Operation 251
    7. Engine Lathe Operation 261
    8. Holemaking on the Manual Mill 271
    9. Threading on the Engine Lathe 301
    10. Taper Turning on the Engine Lathe 311
11. Materials
    1. Introduction to Physical Properties 101
    2. Introduction to Mechanical Properties 111
    3. Introduction to Metals 121
    4. Classification of Steel 201
    5. Essentials of Heat Treatment of Steel 211
    6. Hardness Testing 221
    7. Ferrous Metals 231
    8. Nonferrous Metals 241
    9. Exotic Alloys 301
12. Metal Cutting
    1. Safety for Metal Cutting 101
    2. Cutting Processes 111
    3. Overview of Machine Tools 121
    4. Basic Cutting Theory 201
    5. Band Saw Operation 211
    6. Introduction to Metal Cutting Fluids 221
    7. Metal Cutting Fluid Safety 231
    8. Toolholders for Turning 260
    9. Speed and Feed for the Lathe 301
    10. High-Speed Machining 310
    11. Speed and Feed for the Mill 311
    12. Hard Turning 315
    13. Cutting Tool Materials 321
    14. Machining Titanium Alloys 325
    15. Carbide Grade Selection 331
    16. ANSI Insert Selection 341
    17. Lathe Tool Geometry 351
    18. Mill Tool Geometry 361
    19. Drill Tool Geometry 371
    20. Optimizing Tool Life and Process 381
    21. Impact of Workpiece Materials 391
13. Quality
    1. ISO 9001:2015 Review 122
    2. Approaches to Maintenance 131
14. Safety
    1. Introduction to OSHA 101
    2. Ergonomics 102
    3. Personal Protective Equipment 111
    4. Noise Reduction and Hearing Conservation 121
    5. Respiratory Safety 131
    6. Lockout/Tagout Procedures 141
    7. SDS and Hazard Communication 151
    8. Bloodborne Pathogens 161
    9. Walking and Working Surfaces 171
    10. Fire Safety and Prevention 181
    11. Flammable/Combustible Liquids 191
    12. Hand and Power Tool Safety 201
    13. Safety for Lifting Devices 211
    14. Powered Industrial Truck Safety 221
    15. Confined Spaces 231
    16. Environmental Safety Hazards 241
    17. Machine Guarding 271
15. Shop Essentials (Applied Mathematics)
    1. Math Fundamentals 101
    2. Math: Fractions and Decimals 111
    3. Units of Measurement 112
    4. Manufacturing Process Applications: Part II 125
    5. Algebra Fundamentals 141
    6. Geometry: Lines and Angles 151
    7. Geometry: Triangles 161
    8. Geometry: Circles and Polygons 171
    9. Trigonometry: The Pythagorean Theorem 201
    10. Trigonometry: Sine, Cosine, Tangent 211
    11. Trigonometry: Sine Bar Applications 221
    12. Statistics 231
16. Supervisor Essentials
    1. Essentials of Leadership 100
    2. Managing Performance: Best Practices 130
    3. Managing Performance: Corrective Actions 135
    4. Basics of Manufacturing Costs 140
    5. Conflict Resolution Principles 150
    6. Conflict Resolution for Different Groups 155
    7. Team Leadership 10
    8. Personal Effectiveness 190
    9. Managing the Diverse Workplace 210
    10. Harassment and Discrimination 215
    11. Performance Management and the Law 230
17. Welding
    1. Material Tests for Welding 201
18. Workforce Essentials
    1. Essentials of Communication 115
19. Workholding
    1. Introduction to Workholding 101
    2. Supporting and Locating Principles 111
    3. Locating Devices 121
    4. Clamping Basics 131
    5. Chucks, Collets, and Vises 141
    6. Fixture Body Construction 200
    7. Fixture Design Basics 201
    8. Drill Bushing Selection 230

What you will learn

• Production Floor Safety
• CNC Controls and Programming
• Metallurgy
• Machining and Grinding Processes
• Fastener Assembly
• Inspection Methods
• Six Sigma, 5S, Lean, and TPM
• Workholding Principles

How you will benefit

• Prepare for a career as a manual machinist, production machinist, machine operator, manual lathe operator, or manual mill operator
• Gain the skills you need to confidently perform your job
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This online course provides an intensive overview of the skills necessary in the mechatronics industry, including math, inspection, safety, quality, electrical systems, automation, mechanical systems, fluid systems, rigging, and welding.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

The Mechatronics course provides an intensive overview of the skills necessary for the mechatronics industry. You will learn math, inspection, safety, quality, electrical systems, automation, mechanical systems, fluid systems, rigging, and welding in Mechatronics.

1. Electrical Systems
   1. Electrical Units 101
   2. Safety for Electrical Work 111
   3. Introduction to Circuits 201
   4. Introduction to Magnetism 211
   5. DC Circuit Components 221
   6. NEC(R) Overview 231
   7. AC Fundamentals 241
   8. Electrical Instruments 251
   9. Electrical Print Reading 261
   10. DC Power Sources 271
   11. AC Power Sources 281
   12. Conductor Selection 291
   13. Series Circuit Calculations 301
   14. Parallel Circuit Calculations 311
   15. Battery Selection 321
2. Fasteners
   1. Introduction to Assembly 101
3. Hydraulics and Pneumatics
   1. Introduction to Fluid Systems 101
   2. The Forces of Fluid Power 201
   3. Safety for Hydraulics and Pneumatics 211
   4. Introduction to Hydraulic Components 221
   5. Introduction to Pneumatic Components 231
   6. Introduction to Fluid Conductors 241
   7. Fittings for Fluid Systems 251
   8. Preventative Maintenance for Fluid Systems 261
   9. Hydraulic Power Variables 301
   10. Hydraulic Power Sources 302
   11. Pneumatic Power Variables 311
   12. Pneumatic Power Sources 312
   13. Hydraulic Control Valves 341
   14. Hydraulic Schematics and Basic Circuit Design 342
   15. Pneumatic Control Valves 351
   16. Pneumatic Schematics and Basic Circuit Design 352
   17. Actuator Applications 361
   18. Hydraulic Fluid Selection 371
   19. Contamination and Filter Selection 381
   20. Hydraulic Principles and System Design 391
4. Inspection
   1. Basic Measurement 101
   2. Basics of Tolerance 121
   3. Blueprint Reading 131
   4. Interpreting Prints 231
   5. Introduction to GD&T 301
   6. Major Rules of GD&T 311
   7. Inspecting a Prismatic Part 321
   8. Inspecting a Cylindrical Part 331
5. Lean
   1. Lean Manufacturing Overview 101
   2. Continuous Process Improvement: Managing Flow 124
   3. Continuous Process Improvement: Identifying and Eliminating Waste 125
   4. Total Productive Maintenance 141
   5. 5S Overview 151
   6. Intro to Six Sigma 171
   7. Troubleshooting 181
   8. Conducting Kaizen Events 191
   9. SPC Overview 211
   10. Metrics for Lean 231
   11. Process Flow Charting 241
   12. Strategies for Setup Reduction 251
   13. Management Tools: Problem Solving 270
   14. Six Sigma Goals and Tools 310
6. Mechanical Systems
   1. Introduction to Mechanical Systems 101
   2. Safety for Mechanical Work 111
   3. Forces of Machines 121
   4. Power Transmission Components 201
   5. Mechanical Power Variables 202
   6. Lubricant Fundamentals 211
   7. Bearing Applications 221
   8. Spring Applications 231
   9. Belt Drive Applications 241
   10. Gear Applications 251
   11. Gear Geometry 261
   12. Clutch and Brake Applications 271
7. Metal Cutting
   1. Safety for Metal Cutting 101
   2. Metal Cutting Fluid Safety 231
8. Motor Controls
   1. Relays, Contractors, and Motor Starters 201
   2. Distribution Systems 221
   3. Limit Switches and Proximity Sensors 231
   4. Introduction to Electric Motors 301
   5. Symbols and Diagrams for Motors 311
   6. Logic and Line Diagrams 312
9. PLCs
   1. Introduction to PLCs 201
   2. Hardware for PLCs 211
   3. PLC Inputs and Outputs 231
   4. Hand-Held Programmers of PLCs 280
   5. Overview of PLC Registers 305
10. PLCs: Siemens
    1. Basics of Siemens PLCs 200
    2. Siemens PLC Hardware 210
    3. Siemens PLC Inputs and Outputs 240
    4. Siemens Human Machine Interfaces 250
    5. Siemens SIMATIC Modular PLCs 260
    6. Siemens SIMATIC S7-1200 PLCs 340
    7. Siemens Safety Integrated for Factory Automation 360
11. Quality
    1. ISO 9001:2015 Review 122
    2. Approaches to Maintenance 131
    3. Customer-Focused Quality 155
    4. TS 16849:2009 Overview 221
12. Rigging
    1. Introduction to Machine Rigging 111
    2. Rigging Equipment 121
    3. Rigging Inspection and Safety 131
    4. Lifting and Moving Equipment 141
    5. Rigging Mechanics 220
13. Robotics
    1. Introduction to Robotics 201
    2. Robot Safety 211
    3. Robot Components 221
    4. End Effectors 225
    5. Robot Power and Drive Systems 265
    6. Robot Axes and Pathways 280
    7. Robot Sensors 315
    8. Vision Systems 320
    9. Robot Troubleshooting 331
    10. Concepts of Robot Programming 341
    11. Robot Maintenance 355
    12. Robot Installations 370
14. Safety
    1. Introduction to OSHA 101
    2. Ergonomics 102
    3. Personal Protective Equipment 111
    4. Noise Reduction and Hearing Conservation 121
    5. Respiratory Safety 131
    6. Lockout/Tagout Procedures 141
    7. SDS and Hazard Communication 151
    8. Bloodborne Pathogens 161
    9. Walking and Working Surfaces 171
    10. Fire and Safety and Prevention 181
    11. Flammable/Combustible Liquids 191
    12. Safety for Lifting Devices 211
    13. Powered Industrial Truck Safety 221
    14. Confined Spaces 231
    15. Environmental Safety Hazards 241
    16. Machine Guarding 271
15. Shop Essentials (Applied Mathematics)
    1. Math Fundamentals 101
    2. Math: Fractions and Decimals 111
    3. Units of Measurement 112
    4. Manufacturing Process Applications: Part I 124
    5. Manufacturing Process Applications: Part II 125
    6. Geometry: Lines and Angles 151
    7. Geometry: Triangles 161
    8. Geometry: Circles and Polygons 171
    9. Trigonometry: The Pythagorean Theorem 201
    10. Trigonometry: Sine, Cosine, Tangent 211
    11. Statistics 231
16. Supervisor Essentials
    1. Managing Performance: Best Practices 130
    2. Managing Performance: Corrective Actions 135
    3. Conflict Resolution Principles 150
    4. Conflict Resolution for Different Groups 155
    5. Team Leadership 160
    6. Manufacturing Management 180
    7. Personal Effectiveness 190
    8. Managing the Diverse Workplace 210
    9. Harassment and Discrimination 215
    10. Performance Management and the Law 230
17. Welding
    1. Welding Safety Essentials 101
    2. PPE for Welding 111
    3. Welding Fumes and Gases Safety 121
    4. Electrical Safety for Welding 131
    5. Introduction to Welding 141
    6. Introduction to Welding Processes 151
    7. Math Fundamentals for Welding 161
    8. Geometry Fundamentals for Welding 171
    9. Material Tests for Welding 201
    10. Welding Ferrous Metals 211
    11. Welding Nonferrous Metals 212
    12. Overview of Weld Types 221
    13. Overview of Weld Defects 222
    14. Welding Symbols and Codes 231
    15. Fabrication Process 232
    16. Electrical Power for Arc Welding 241
    17. Introduction to GMAW 251
    18. Introduction to SMAW 252
    19. Introduction to FCAW 261
    20. Introduction to GTAW 262
    21. Overview of Soldering 271
    22. Introduction to Automation 291
    23. GMAW Applications 301
    24. Advanced GMAW Applications 302
    25. SMAW Applications 311
    26. FCAW Applications 321
    27. GTAW Applications 331
18. Workforce Essentials
    1. Essentials of Communication 115

What you will learn

• Troubleshooting
• GD&T
• Production Floor Safety
• Six Sigma, 5S, Lean, and TPM
• PLC Equipment and Communication
• Electrical, Mechanical, and Fluid Systems
• Robot Programming and Maintenance
• Welding Processes

How you will benefit

• Prepare for a career as a Mechatronics Engineer, Mechatronics Technician, Automation Engineer, Automation Specialist, or a Controls Engineer
• Gain the skills you need to confidently perform your job
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

For decades to come, natural gas will be produced and consumed in the United States, creating an ongoing demand for natural gas plant operators. This online course provides the fundamental technical background you need to get started in this field.

Requirements:

Hardware Requirements:

• This course must be taken on a PC. Macs are not compatible.

Software Requirements:

• PC: Windows 8 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge is also compatible.
• Software must be installed and fully operational before the course begins.
• Adobe Acrobat Reader.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Natural gas plant operators monitor and control the systems and equipment that take gas from its natural state and convert it into a usable product. Your job is to ensure that the gas produced is free of impurities. The purified gas is then separated into products such as ethane, propane, butane, and methane. You'll also be responsible for the flow of this processed gas into the pipelines that carry it to the various industries and homes that use it for fuel. In addition, you'll make gas flow changes to the supply system to keep pace with customer demands.

Natural gas plant operators earn above-average wages and enjoy good job security and the potential to advance into supervisory or management positions. This is a user-friendly course, designed for people who have no prior exposure to the technical aspects of hydrocarbons, energy, or industrial processes. No prior science or math education is necessary; the course includes all of the necessary basic science and technology elements.

1. Basic Safety
2. Basic Hazard Communication
3. Basic Lockout-Tagout
4. Math 1000: Basic Math 1
5. Math 2000: Basic Math 2
6. Math2500: Basic Math 3
7. Applied Physics 1
8. Applied Physics 2
9. Applied Physics 3
10. Heat Exchangers
11. Lubrication and Bearings
12. Electrical Safety
13. Electricity for Operators and Technicians
14. Industrial Valves
15. Compressed Air
16. How to Read Process Drawings
17. Basic Process Instrumentation and Control
18. Pump Fundamentals
19. Centrifugal Pumps - Operation
20. Refining 1000: Introduction to Petroleum Refining
21. Refining 2000: Distillation Technology
22. Natural Gas 1000: Introduction to Natural Gas
23. Natural Gas 2000: Introduction to Drilling
24. Natural Gas 3000: Gas Plant Operations 1
25. Natural Gas 3500: Gas Plant Operations 2

What you will learn

• Master basic math, physics, and chemistry knowledge necessary for a gas plant operator
• Understand safety as it relates to gas plant production
• Describe basic elements of electricity
• Read technical process drawings
• Describe basic operational elements of lubrication and centrifugal pumps
• Understand how natural gas is found in nature and how gas wells are developed
• Describe how natural gas compression and refrigeration systems work
• Determine various methods used to purify natural gas

How you will benefit

• Develop the knowledge and skills you'll need to begin a career in natural gas plant operations
• Learn what to expect when working at a natural gas plant
• Refine your skills in mathematics and science that will be used on the job
• Set yourself apart from competitors by taking an online course to prove your interest
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email, online forms, and phone.

Learn the skills you need to start work as an in-demand oil refinery operator.

Requirements:

Hardware Requirements:

• This course must be taken on a PC. Macs are not compatible.

Software Requirements:

• PC: Windows 8 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge is also compatible.
• Software must be installed and fully operational before the course begins.
• Adobe Acrobat Reader.
• Microsoft Word Online

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment. You're encouraged to print the on-screen course material for your reference.

The United States is home to many oil refineries, all of which need experts to run their operations. Oil refinery operators are highly paid and enjoy a stable work environment, and there's an ongoing need for entry-level personnel. Sounds great, right? This online course will teach you everything you need to know to enter the energy industry as an oil refinery operator. The course is unique and user-friendly, designed for people who have minimal knowledge of the industry.

The energy industry is ever-changing, encompassing everything from power plant operations, to petrochemicals like oil and natural gas, to renewable energy sources. Taking an oil refinery operations course offers you a path to a growing sector of the field. A large portion of the workforce is retiring, creating a critical shortage of technical workers for many years to come—which is great for entry-level workers.

Currently very few institutions provide entry-level training and courses in oil refinery operation. Generally, oil refinery operators enter the workforce in entry-level positions and work their way up, sometimes to senior management positions. In their day-to-day tasks, oil refinery operators have the responsibility to make sure unit and process systems function properly. They consider personnel safety the primary objective and ensure production processes are operating safely. They continually monitor instrumentation and the operation of equipment and make adjustments to keep system process variables within acceptable ranges. Oil refinery operators also detect potential and actual problems and take corrective action to prevent the interruption of system operations. You will learn how to perform all these oil refinery processes and more in this course.

1. Basic Safety
2. Basic Hazard Communication
3. Basic Lockout-Tagout
4. Math 1000: Basic Math 1
5. Math 2000: Basic Math 2
6. Math2500: Basic Math 3
7. Applied Physics 1
8. Applied Physics 2
9. Applied Physics 3
10. Heat Exchangers
11. Lubrication and Bearings
12. Electrical Safety
13. Electricity for Operators and Technicians
14. Industrial Valves
15. Compressed Air
16. How to Read Process Drawings
17. Basic Process Instrumentation and Control
18. Pump Fundamentals
19. Centrifugal Pumps - Operation
20. Refining 1000: Introduction to Petroleum Refining
21. Refining 2000: Distillation Technology
22. Refining 3000: Basic Refinery Processes

What you will learn

• Oil Refinery Operations
• How to operate an oil refinery with safety as the prime consideration
• Instrumentation and the operation of equipment
• How to keep system process variables, such as flows, temperatures, and pressures, within acceptable ranges
• How to detect problems, analyze trends, and take corrective action
• How to maintain communication with other operators, maintenance, and management

How you will benefit

• You will be prepared for entry-level jobs at oil refinery companies in the United States
• You will be awarded an official certificate of completion
• You will be able to use our facilitators and career counselors to help you build your resume and to give you advice during your job search
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

Industry instructors

This program is supported by a team of highly experienced industry instructors.

Learn the skills you need to gain entry-level employment as a power plant operator.

Requirements:

Hardware Requirements:

• This course must be taken on a PC. Macs are not compatible.

Software Requirements:

• PC: Windows 8 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge is also compatible.
• Software must be installed and fully operational before the course begins.
• Adobe Acrobat Reader.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment. You're encouraged to print the on-screen course material for your reference.

If you want a career with high pay and a stable work environment, this online Power Plant Operations course will get you on the right track. Now is an excellent time to start an exciting career as a power plant operator—there are thousands of power plants in the United States alone, and a large portion of the workforce is retiring, creating open power plant operator jobs for many years to come. Power plant operator training will prepare you to fill the ongoing need for entry-level positions in this industry.

This unique, user-friendly course is designed for people who have minimal knowledge of the industry, math, physics, or chemistry. The necessary science concepts are built into the course modules. Very few institutions provide power plant operator training and certification opportunities for entry-level operators, so your certificate from this course will give you an edge over others in the field.

After you complete this course, you will be fluent in how to operate a power plant with safety as the prime consideration. You'll be able to make adjustments to keep system process variables, such as flows, temperatures, and pressures, within acceptable ranges; detect both potential and actual problems and analyze operational trends as well as take corrective actions. You'll also learn important strategies to sustain communication with other operators, as well as maintenance and management.

1. Basic Safety
2. Basic Hazard Communication
3. Basic Lockout-Tagout
4. Math 1000: Basic Math 1
5. Math 2000: Basic Math 2
6. Math 2500: Basic Math 3
7. Applied Physics 1
8. Applied Physics 2
9. Applied Physics 3
10. Heat Exchangers
11. Lubrication and Bearings
12. Electrical Safety
13. Electricity for Operators and Technicians
14. Industrial Valves
15. Compressed Air
16. How to Read Process Drawings
17. Basic Process Instrumentation and Control
18. Pump Fundamentals
19. Centrifugal Pumps: Operation
20. Power 1000: Steam Generation
21. Power 2100: Basic Boiler Systems
22. Power 3000: Fuels and Combustion
23. Power 3100: Boiler and Auxiliaries 1
24. Power 3200: Boiler and Auxiliaries 2
25. Power 3300: Boiler and Auxiliaries 3
26. Power 3500: Cogeneration and HRSG

What you will learn

• Power Plant Operations
• Basic safety protocols and best practices
• The mathematics and communication skills you will need to be successful in your new position
• How to monitor instrumentation and operate equipment
• How to prevent potential problems and troubleshoot actual problems
• Standard operating procedures for starting and stopping production equipment

How you will benefit

• You will receive a certificate of completion at the end of the course that indicates your comprehensive knowledge of the topics covered
• You will be prepared for an entry-level job as a power plant operator
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

Max Ansari

Max Ansari is currently the Partner/Training Program Development Manager at Houston Industrial Training Institute (HITI), which focuses on development of web-based training programs for complex industrial processes such as power plants, oil refineries, and chemical manufacturing plants. His past experience includes 15 years of operational experience in a large refinery/power plant complex including three years as Manager of Operations. He holds a Master of Science in Electrical Engineering, and is a certified Professional Engineer and First Class Steam Engineer.

You will gain an intensive overview of the skills needed for cold stamping press work. You will learn math, inspection, safety, materials, quality, stamping, forming, and automation to work at as a cold stamping press operator.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

There are a lot of job opportunities available for press operators, but companies require the necessary skills and experience. This online Press Operator: Cold Stamping course allows you to gain the required knowledge that provides a pathway to the skills you need validate your competence.

The course provides an intensive overview of the skills necessary for cold stamping press work. You will learn about math, inspection, safety, materials, quality, stamping, forming, and automation as you prepare for a successful career as a press operator performing cold stamping.

1. Math
   1. Math Fundamentals 101
   2. Math: Fractions and Decimals 111
   3. Units of Measurement 112
   4. Basics of Tolerance 121
   5. Blueprint Reading 131
   6. Algebra Fundamentals 141
   7. Geometry: Lines and Angles 151
   8. Geometry: Triangles 161
   9. Geometry: Circles and Polygons 171
   10. Statistics 231
2. Inspection
   1. Basic Measurement 101
   2. Hole Standards and Inspection 141
   3. Thread Standards and Inspection 151
   4. Surface Texture and Inspection 201
   5. Material Tests for Welding 201
   6. Inspecting a Prismatic Part 321
   7. Inspecting a Cylindrical Part 331
   8. In-Line Inspection Applications 381
3. Safety
   1. Intro to OSHA 101
   2. Personal Protective Equipment 111
   3. Noise Reduction and Hearing Conservation 121
   4. Respiratory Safety 131
   5. Lockout/Tagout Procedures 141
   6. SDS and Hazard Communication 151
   7. Bloodborne Pathogens 161
   8. Walking and Working Surfaces 171
   9. Fire Safety and Prevention 181
   10. Flammable/Combustible Liquids 191
   11. Ergonomics 102
   12. Hand and Power Tool Safety 201
   13. Safety for Lifting Devices 211
   14. Powered Industrial Truck Safety 221
   15. Confined Spaces 231
   16. Environmental Safety Hazards 241
   17. Machine Guarding 140
4. Materials
   1. Introduction to Physical Properties 101
   2. Introduction to Mechanical Properties 111
   3. Introduction to Metals 121
   4. Classification of Steel 201
   5. Essentials of Heat Treatment of Steel 211
   6. Ferrous Metals 231
   7. Nonferrous Metals 241
   8. Exotic Alloys 301
5. Quality and Manufacturing Management
   1. Lean Manufacturing Overview 101
   2. Essentials of Leadership 110
   3. Essentials of Communication 120
   4. ISO 9001: 2015 Review 122
   5. Continuous Process Improvement: Managing Flow 124
   6. Continuous Process Improvement: Identifying and Eliminating Waste 125
   7. Managing Performance: Best Practices 130
   8. Approaches to Maintenance 131
   9. Process Design and Development 133
   10. Managing Performance: Corrective Actions 135
   11. Production System Design and Development 136
   12. Equipment/Tool Design and Development 137
   13. Basics of Manufacturing Costs 140
   14. Total Productive Maintenance 141
   15. Conflict Resolution Principles 150
   16. 5S Overview 151
   17. Conflict Resolution for Different Groups 155
   18. Team Leadership 160
   19. Intro to Six Sigma 171
   20. Quality and Customer Service 175
   21. Troubleshooting 181
   22. Personal Effectiveness 190
   23. Managing the Diverse Workplace 210
   24. SPC Overview 211
   25. Harassment and Discrimination 215
   26. Performance Management and the Law 230
   27. Metrics for Lean 231
   28. Process Flow Charting 241
   29. Strategies for Setup Reduction 251
   30. Six Sigma Goals and Tools 310
6. Machining
   1. Metal Cutting Fluid Safety 231
   2. Optimizing Tool Life and Process 381
   3. Introduction to CAD and CAM for Machining 241
   4. Machining Titanium Alloys 325
7. Stamping
   1. Press Basics 110
   2. Stamping Safety 115
   3. Punch and Die Operations 120
   4. Die Components 130
   5. Coil Handling Equipment 140
   6. Die Cutting Variables 200
   7. Monitoring Press Operations 220
   8. Coil Loading Procedures 250
   9. Die Setting Procedures 300
8. Press Brakes
   1. Press Brake Safety 100
   2. Press Brake Components 110
   3. Bending Fundamentals 120
   4. Die Bending Operations 130
   5. Operating the Press Brake 200
   6. Press Brake Specifications 220
9. Electrical/Mechanical Systems and Motor Controls
   1. Safety for Electrical Work 111
   2. Lubricant Fundamentals 130
   3. Robot Sensors 150
   4. Robotic Control Systems 240
   5. Specs for Servomotors 330
   6. Limit Switches and Proximity Sensors 360

What you will learn

• Production Floor Safety
• Metallurgy
• Press Operation and Procedures
• Press Brake Operation and Procedures
• Six Sigma, 5S, Lean, and TPM
• Inspection Methods

How you will benefit

• Prepare for a career as a press operator, cold stamping press operator, die setter, fabrication operator, machine operator, machine setter, or punch press operator
• Gain the skills you need to confidently perform your job
• Get the education you need in a self-paced, online format
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This course provides an intensive overview of hot stamping press work. You will learn the math, inspection, safety, materials, quality, stamping, forming, and automation skills needed to work as a hot stamping press operator.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

There are a lot of job opportunities available for those who want manufacturing roles, but companies require the necessary skills and experience. This online Press Operator: Hot Stamping course allows you to gain the required knowledge and a pathway to the skills you need to validate your competence.

A Press Operator is responsible for the routine production of a coil-fed stamping press. This course provides an intensive overview of the skills necessary for hot stamping press work. You will learn the math, inspection, safety, materials, quality, stamping, forming, and automation to work as a hot stamping press operator.

1. Math
   1. Math Fundamentals 101
   2. Math: Fractions and Decimals 111
   3. Units of Measurement 112
   4. Basics of Tolerance 121
   5. Blueprint Reading 131
   6. Algebra Fundamentals 141
   7. Geometry: Lines and Angles 151
   8. Geometry: Triangles 161
   9. Geometry: Circles and Polygons 171
   10. Statistics 231
2. Inspection
   1. Basic Measurement 101
   2. Hole Standards and Inspection 141
   3. Thread Standards and Inspection 151
   4. Surface Texture and Inspection 201
   5. Material Tests for Welding 201
   6. Inspecting a Prismatic Part 321
   7. Inspecting a Cylindrical Part 331
   8. In-Line Inspection Applications 381
3. Safety
   1. Intro to OSHA 101
   2. Personal Protective Equipment 111
   3. Noise Reduction and Hearing Conservation 121
   4. Respiratory Safety 131
   5. Lockout/Tagout Procedures 141
   6. SDS and Hazard Communication 151
   7. Bloodborne Pathogens 161
   8. Walking and Working Surfaces 171
   9. Fire Safety and Prevention 181
   10. Flammable/Combustible Liquids 191
   11. Ergonomics 102
   12. Hand and Power Tool Safety 201
   13. Safety for Lifting Devices 211
   14. Powered Industrial Truck Safety 221
   15. Confined Spaces 231
   16. Environmental Safety Hazards 241
   17. Machine Guarding 140
4. Materials
   1. Introduction to Physical Properties 101
   2. Introduction to Mechanical Properties 111
   3. Introduction to Metals 121
   4. Classification of Steel 201
   5. Essentials of Heat Treatment of Steel 211
   6. Ferrous Metals 231
   7. Nonferrous Metals 241
   8. Exotic Alloys 301
5. Quality and Manufacturing Management
   1. Lean Manufacturing Overview 101
   2. Essentials of Leadership 110
   3. Essentials of Communication 120
   4. ISO 9001: 2015 Review 122
   5. Continuous Process Improvement: Managing Flow 124
   6. Continuous Process Improvement: Identifying and Eliminating Waste 125
   7. Managing Performance: Best Practices 130
   8. Approaches to Maintenance 131
   9. Process Design and Development 133
   10. Managing Performance: Corrective Actions 135
   11. Production System Design and Development 136
   12. Equipment/Tool Design and Development 137
   13. Basics of Manufacturing Costs 140
   14. Total Productive Maintenance 141
   15. Conflict Resolution Principles 150
   16. 5S Overview 151
   17. Conflict Resolution for Different Groups 155
   18. Team Leadership 160
   19. Intro to Six Sigma 171
   20. Quality and Customer Service 175
   21. Troubleshooting 181
   22. Personal Effectiveness 190
   23. Managing the Diverse Workplace 210
   24. SPC Overview 211
   25. Harassment and Discrimination 215
   26. Performance Management and the Law 230
   27. Metrics for Lean 231
   28. Process Flow Charting 241
   29. Strategies for Setup Reduction 251
   30. Six Sigma Goals and Tools 310
6. Machining
   1. Metal Cutting Fluid Safety 231
   2. Optimizing Tool Life and Process 381
   3. Introduction to CAD and CAM for Machining 241
   4. Machining Titanium Alloys 325
7. Stamping
   1. Press Basics 110
   2. Stamping Safety 115
   3. Punch and Die Operations 120
   4. Die Components 130
   5. Coil Handling Equipment 140
   6. Die Cutting Variables 200
   7. Monitoring Press Operations 220
   8. Coil Loading Procedures 250
   9. Die Setting Procedures 300
8. Press Brakes
   1. Press Brake Safety 100
   2. Press Brake Components 110
   3. Bending Fundamentals 120
   4. Die Bending Operations 130
   5. Operating the Press Brake 200
   6. Press Brake Specifications 220
9. Electrical/Mechanical Systems and Motor Controls
   1. Safety for Electrical Work 111
   2. Lubricant Fundamentals 130
   3. Robot Sensors 150
   4. Robotic Control Systems 240
   5. Specs for Servomotors 330
   6. Limit Switches and Proximity Sensors 360

What you will learn

• Production Floor Safety
• Metallurgy
• Press Operation and Procedures
• Press Brake Operation and Procedures
• Six Sigma, 5S, Lean, and TPM
• Inspection Methods

How you will benefit

• Prepare for a career as a press operator, hot stamping press operator, die setter, fabrication operator, machine operator, machine setter, or punch press operator
• Gain the skills you need to confidently perform your job
• Get the education you need in a self-paced, online format
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This online course provides an intensive overview of the skills needed to become a process technician. You will learn a wide variety of skills, including math, inspection, safety, machining, quality, electrical systems, automation, mechanical systems, motor controls, fluid systems, and joining.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Are you looking for the education and training that will give you career a boost and allow you to get the job you want? This online Process Technician course provides an intensive overview of the skills necessary to become a process technician.

A Process Technician is involved throughout the manufacturing process. They operate equipment, oversee processes, document results and adhere to strict protocols. This course will teach you the math, inspection, safety, machining, quality, electrical systems, automation, mechanical systems, motor controls, fluid systems, and joining necessary to be on your way to a successful career as a process technician.

1. Electrical Systems
   1. Electrical Units 101
   2. Safety for Electrical Work 111
   3. Introduction to Circuits 201
   4. Introduction to Magnetism 211
   5. DC Circuit Components 221
   6. NEC® Overview 231
   7. AC Fundamentals 241
   8. Electrical Instruments 251
   9. Electrical Print Reading 261
   10. DC Power Sources 271
   11. AC Power Sources 281
   12. Conductor Selection 291
   13. Series Circuit Calculations 301
   14. Parallel Circuit Calculations 311
   15. Battery Selection 321
2. Fasteners
   1. Intro to Fastener Ergonomics 130
   2. Properties for Fasteners 200
   3. Introduction to Fastener Threads 221
   4. Overview of Threaded Fasteners 231
   5. Tools for Threaded Fasteners 235
   6. Overview of Non-Threaded Fasteners 241
   7. Understanding Torque 245
   8. Threaded Fastener Selection 255
3. Hydraulics and Pneumatics
   1. Introduction to Fluid Systems 101
   2. The Forces of Fluid Power 201
   3. Safety for Hydraulics and Pneumatics 211
   4. Introduction to Pneumatic Components 231
   5. Fittings for Fluid Systems 251
   6. Preventative Maintenance for Fluid systems 261
   7. Pneumatic Power Variables 311
   8. Pneumatic Power Sources 312
   9. Hydraulic Schematics and Basic Circuit Design 342
   10. Pneumatic Control Valves 351
   11. Pneumatic Schematics and Basic Circuit Design 352
   12. Actuator Applications 361
   13. Contamination and Filter Selection 381
4. Inspection
   1. Basic Measurement 101
   2. Calibration Fundamentals 111
   3. Basics of Tolerance 121
   4. Blueprint Reading 131
   5. Hole Standards and Inspection 141
   6. Thread Standards and Inspection 151
   7. Surface Texture and Inspection 201
   8. Interpreting Prints 231
   9. Introduction to GD&T 301
   10. In-Line Inspection Applications 381
5. Lean
   1. Lean Manufacturing Overview 101
   2. Continuous Process Improvement: Managing Flow 124
   3. Continuous Process Improvement: Identifying and Eliminating Waste 125
   4. Total Productive Maintenance 141
   5. 5S Overview 151
   6. Intro to Six Sigma 171
   7. Troubleshooting 181
   8. SPC Overview 211
   9. Metrics for Lean 231
   10. Process Flow Charting 241
   11. Strategies for Setup Reduction 251
   12. Six Sigma Goals and Tools 310
6. Mechanical Systems
   1. Introduction to Mechanical Systems 101
   2. Safety for Mechanical Work 111
   3. Forces of Machines 121
   4. Power Transmission Components 201
   5. Mechanical Power Variables 202
   6. Lubricant Fundamentals 211
   7. Bearing Applications 221
   8. Spring Applications 231
   9. Belt Drive Applications 241
   10. Gear Applications 251
   11. Gear Geometry 261
   12. Clutch and Brake Applications 271
7. Metal Cutting
   1. Safety for Metal Cutting 101
   2. Metal Cutting Fluid Safety 231
8. Motor Controls
   1. Relays, Contractors, and Motor starters 201
   2. Control Devices 211
   3. Distribution Systems 221
   4. Limit Switches and Proximity Sensors 231
   5. Introduction to Electric Motors 301
   6. Symbols and Diagrams for Motors 311
   7. Logic and Line Diagrams 312
   8. DC Motor Applications 321
   9. AC Motor Applications 322
   10. Specs for Servomotors 330
   11. Solenoids 331
   12. Reversing Motor Circuits 341
   13. Reduced Voltage Starting 370
   14. Acceleration Methods 385
9. PLCs
   1. Introduction to PLCs 201
   2. Hardware for PLCs 211
   3. Basics of Ladder Logic 221
   4. Numbering Systems and Codes 222
   5. PLC Inputs and Outputs 231
   6. Basic Programming for PLCs 241
   7. PLC Counters and Times 251
   8. Hand-Held Programmers of PLCs 280
   9. PLC Diagrams and Programs 300
   10. Overview of PLC Registers 305
   11. PLC Program Control Instructions 310
   12. Math for PLCs 200
   13. Sequencer Instructions for PLCs 330
10. PLCs: Siemens
    1. Basics of Siemens PLCs 200
    2. Siemens PLC Hardware 210
    3. Numbers, Codes and Dara Types for Siemens PLCs 220
    4. Siemens PLC Inputs and Outputs 240
11. Siemens Human Machine Interfaces 250
    1. Siemens SIMATIC Modular PLCs 260
    2. Siemens PLC Programming Concepts 270
    3. Basic Ladder Diagram Programming for Siemens PLCs 280
    4. Basic Function Block Diagram Programming for Siemens PLCs 290
    5. Ladder Diagram Timers and Counters for Siemens PLCs 300
    6. Function Block Diagram Timers and Counters for Siemens PLCs 310
    7. Additional Ladder Diagram Instructions for Siemens PLCs 330
    8. Siemens SIMATIC S7-1200 PLCs 340
    9. Siemens SIMATIC S7-1500 PLCs 350
    10. Siemens Safety Integrated for Factory Automation 360
12. Quality
    1. ISO 9001:2015 Review 122
    2. Approaches to Maintenance 131
    3. TS 16949:2009 Overview 221
13. Robotics
    1. Robot Troubleshooting 331
    2. Robot Maintenance 355
    3. Robot Installations 370
14. Safety
    1. Introduction to OSHA 101
    2. Ergonomics 102
    3. Personal Protective Equipment 111
    4. Noise Reduction and Hearing Conservation 121
    5. Respiratory Safety 131
    6. Lockout/Tagout Procedures 141
    7. SDS and Hazard Communication 151
    8. Bloodborne Pathogens 161
    9. Walking and Working Surfaces 171
    10. Fire Safety and Prevention 181
    11. Flammable/Combustible Liquids 191
    12. Hand and Power Tool Safety 201
    13. Safety for Lifting Devices 211
    14. Powered Industrial Truck Safety 221
    15. Confined Spaces 231
    16. Environmental Safety Hazards 241
    17. Machine Guarding 271
15. Shop Essentials (Applied Mathematics)
    1. Math Fundamentals 101
    2. Math: Fractions and Decimals 111
    3. Units of Measurement 112
    4. Algebra Fundamentals 141
    5. Geometry: Lines and Anges 151
    6. Geometry: Triangles 161
    7. Geometry: Circles and Polygons 171
    8. Trigonometry: The Pythagorean Theorem 201
    9. Trigonometry: Sine, Cosine, Tangent 211
    10. Trigonometry: Sine Bar applications 221
    11. Statistics 231
16. Supervisor Essentials
    1. Essentials of Leadership 100
    2. Managing Performance: Best Practices 130
    3. Managing Performance: Corrective Actions 135
    4. Basics of Manufacturing Costs 140
    5. Conflict Resolution Principles 150
    6. Conflict Resolution for Different Groups 155
    7. Team Leadership 160
    8. Personal Effectiveness 190
    9. Managing the Diverse Workplace 210
    10. Harassment and Discrimination 215
    11. Performance Management and the Law 230
17. Welding
    1. Overview of Soldering 271
18. Workforce Essentials
    1. Essentials of Communication 115

What you will learn

• Troubleshooting
• Six Sigma, 5S, Lean, and TPM
• Inspection Methods
• PLC Communication and Programming
• Electrical, Mechanical, and Fluid Systems
• Robot Maintenance and Installation
• Fabrication and Assembly Processes

How you will benefit

• Prepare for a career as a process technician, manufacturing technician, process engineer, equipment engineer, or lab technician
• Gain confidence in your ability to perform your job
• Get the education you need in a self-paced, online format
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This course provides an intensive overview of the skills necessary for quality assurance and inspection. You will learn math, inspection, safety, materials, quality, and management skills as you prepare to become a quality inspector.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Do you have a keen attention to detail? A career as a quality inspector could be a great fit. This online Quality Inspector course will provide you with the knowledge and skills you need to prove competency and begin your new career quickly.

This advanced manufacturing training provides an intensive overview of the skills necessary for quality assurance and inspection, including math, inspection, safety, materials, quality, and management.

1. Inspection
   1. Basic Measurement 101
   2. Calibration Fundamentals 111
   3. Basics of Tolerance 121
   4. Blueprint Reading 131
   5. Hole Standards and Inspection 141
   6. Thread Standards and Inspection 151
   7. Surface Texture and Inspection 201
   8. Interpreting Prints 231Measuring System Analysis 300
   9. Introduction to GD&T 301
   10. Major Rules of GD&T 311
   11. Inspecting a Prismatic Part 321
   12. Inspecting a Cylindrical Part 331
   13. Advanced Hole Inspection 341
   14. Inspecting with Optical Comparators 351
   15. Inspecting with CMMs 361
   16. Calibration and Documentation 371
   17. In-Line Inspection Applications 381
2. Lean
   1. Lean Manufacturing Overview 101
   2. Continuous Process Improvement: Managing Flow 124
   3. Continuous Process Improvement: Identifying and Eliminating Waste 125
   4. Developing a Lean Culture 135
   5. 5S Overview 151
   6. Cell Design and Pull Systems 161
   7. Intro to Six Sigma 171
   8. Troubleshooting 181
   9. Conducting Kaizen Events 191
   10. SPC Overview 211
   11. Metrics for Lean 231
   12. Process Flow Charting 241
   13. Strategies for Setup Reduction 251
   14. Total Quality Management Overview 261
   15. Management Tools: Problem Solving 270
   16. Management Tools: Product and Process Design 275
   17. Value Stream Mapping: The Future State 311
   18. Maintaining a Consistent Lean Culture 330
   19. Transforming Lean into Business Results 340
   20. Measuring Lean Systems 350
3. Materials
   1. Introduction to Physical Properties 101
   2. Introduction to Mechanical Properties 111
   3. Introduction to Metals 121
   4. Essentials of Heat Treatment of Steel
   5. Hardness Testing 221
   6. Ferrous Metals 231
   7. Nonferrous Metals 241
   8. Exotic Alloys 301
4. Metal Cutting
   1. Safety for Metal Cutting 101
   2. Machining Titanium Alloys 325
5. Quality
   1. ISO 9000 Review 121
   2. Intro to Supply Chain Management 140
   3. Customer-Focused Quality 155
   4. Conducting an Internal Audit 201
   5. TS 16949:2009 Overview 221
6. Safety
   1. Introduction to OSHA 101
   2. Ergonomics 102
   3. Personal Protective Equipment 111
   4. Noise Reduction and Hearing Conversation 121
   5. Respiratory Safety 131
   6. Lockout/Tagout Procedures 141
   7. SDS and Hazard Communication 151
   8. Bloodborne Pathogens 161
   9. Walking and Working Surfaces 171
   10. Fire and Safety and Prevention 181
   11. Flammable/Combustible Liquids 191
   12. Hand and Power Tool Safety 201
   13. Safety for Lifting Devices 211
   14. Powered Industrial Truck Safety 221
   15. Confined Spaces 231
   16. Environmental Safety Hazards 241
   17. Machine Guarding 271
7. Shop Essentials (Applied Mathematics)
   1. Math Fundamentals 101
   2. Math: Fractions and Decimals 111
   3. Units of Measurement 112
   4. Algebra Fundamentals 141
   5. Geometry: Lines and Angles 151
   6. Geometry: Triangles 161
   7. Geometry: Circles and Polygons 171
   8. Trigonometry: The Pythagorean Theorem 201
   9. Trigonometry: Sine, Cosine, Tangent 211
   10. Trigonometry: Sine Bar Applications 221
   11. Statistics 231
8. Supervisor Essentials
   1. Essentials of Leadership 100
   2. Managing Performance: Best Practices 130
   3. Managing Performance: Corrective Actions 135
   4. Basics of Manufacturing Costs 140
   5. Conflict Resolution Principles 150
   6. Conflict Resolution Principles 150
   7. Conflict Resolution for Different Groups 155
   8. Team Leadership 160
   9. Personal Effectiveness 190
   10. Managing the Diverse Workplace 210
   11. Harassment and Discrimination 215
   12. Performance Management and the Law 230
9. Welding
   1. Material Tests for Welding 201
   2. Fabrication Process 232
10. Workforce Essentials
    1. Essentials of Communication 115
11. Virtual Labs/Simulations (optional)
    1. Safety Awareness in Manufacturing
    2. Inspecting Outer Diameters I
    3. Inspecting Outer Diameters II
    4. Inspecting Groove Width
    5. Inspecting Thread Sizes
    6. Inspecting Inside Diameter

What you will learn

• Production Floor Safety
• Metallurgy
• Inspection Methods
• GD&T
• Six Sigma, 5S, Lean, and TPM

How you will benefit

• Prepare for a career as a quality inspector, quality technician, quality assurance inspector, quality assurance technician, quality auditor, or quality control inspector
• Gain the skills you need to confidently perform your job
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

From updating existing buildings to building construction, demand for electricians is on the rise. This course will train you for an entry-level career as an electrician by teaching you the fundamental skills you need to succeed, such as electrical theory, wiring and installation, customer service best practices, the National Electrical Code®, and much more.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC, Mac, or Chromebook.

Software Requirements:

• PC: Windows 10 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Microsoft Word or equivalent (not included in enrollment).
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Simulation Requirements

• Desktop Browser: A 64-bit web browser
• Recommend: Mozilla Firefox 52+, Google Chrome 57+
• Supported: MS Edge 15+, Apple Safari 10.1+

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment. The following textbooks will be shipped to you approximately 7-10 business days after enrollment:

• Electrical Writing Residential with Blueprints
• National Electrical Code (NEC) 2023

The following digital textbook for this course is accessed via links in the course lessons:

• Delmar's Standard Book of Electricity (eBook)

Please note: You will receive a digital book if the physical book is on backorder.

The Residential Electrician course is designed to teach you the fundamental skills needed to work with residential electrical systems—no previous experience is required. With booming infrastructure, new energy conservation technology, and an aging workforce, demand for skilled electricians is in high demand, with 80,000 residential electrician jobs opening each year through 2031, projected by the U.S. Bureau of Labor Statistics. Completing this residential electrician training will prepare you to pass your state's electrical licensing exam and kick-start your career as a residential electrician or electrician apprentice.

Throughout your online residential electrician training, you will learn electrical theory, wiring and installation, safety procedures, the use of common hardware and materials, the use of building plans, and more. You will also have access to 30+ virtual simulations that facilitate hands-on practice and 10 lessons on customer service, an essential soft skill in your electrical residential career. On-the-job, critical thinking scenarios will help boost your success, along with quizzes in each lesson of this residential electrician course.

Our residential electrician training features engaging and interactive content that will further increase your real-world success, such as 3D models and walk-throughs of main electrical panels, circuit breakers, DMM, fuses, and branch circuit learning checks. You will also play games, including name that function, ampacity, and labeling receptacle, paired with in-the-field photo access (provided by your course SME).

Investing in your electrician education is the first step toward a successful electrician career! Residential electrician training prepares you for electrician licensing tests, generally required by most states and localities. While tests differ, you will need to understand the common situations in electrical work, including the use of the National Electrical Code®, local electrical codes, circuits, and various types of wiring methods.

Please check with your state, county, or city for residential electrician licensing rules and whether this course's hours will be accepted for licensing. *Our Residential Electrician course does not count towards getting a Massachusetts Electrician license.

1. The Electrical Industry
2. Residential Electricity – A Basic Overview
3. Basic Electrical Math
4. Basic Electrical Theory
5. Test Instruments
6. Electrical System Operation Principles
7. Circuit and Personnel Protection
8. Electrical Safety
9. Jobsite Safety
10. Hand Tools
11. Power Tools
12. Building Materials – Conductors and Cables
13. Building Materials – Enclosures and Cabinets
14. Building Materials – Terminal Devices
15. Residential Services and Feeders
16. Grounding and Bonding of Services
17. Feeders and Separate Buildings
18. Construction Drawings
19. Branch Circuit Basics
20. Required Branch Circuits
21. GFCI Protection and Branch Circuits
22. AFCI Protection
23. Required Outlets and Devices
24. Appliance Connections
25. Project Planning
26. Troubleshooting
27. Course Challenge
28. Soft Skills for the Electrician (optional)

What you will learn

• Explore this video overview of the Residential Electrician course
• Review branch and feeder circuits with various types of cable and conduit
• Service of circuit breakers, lighting fixtures, receptacles, switches, paddle fans, and electric motors
• Understand how to identify and fix electrical problems on service calls
• Installation, maintenance, and troubleshooting photovoltaic renewable energy systems
• Have access to 10 lessons on customer service
• Instructor-graded assignments and quizzes in each lesson
• Cover on-the-job scenarios (critical thinking scenarios) and explore in the field photos
• Optional soft skills for a residential electrician career
• 3D Models added, including main panel, circuit breaker, DMM, fuses, 3D model walk-throughs, and branch circuit learning check
• Games including name that function, ampacity, and labeling receptacle

How you will benefit

• Obtain foundational knowledge and skills needed for entry-level electrician career success
• Understand how to use the National Electrical Code as well as sizing electrical boxes, circuit conductors, fuses or circuit breakers, and service entrance conductors
• Gain valuable wiring skills, such as proper use of hand and power tools, splicing wires together properly, attaching electrical boxes to building framing members, fishing a cable in an existing wall, and installing an overhead service entrance
• Receive a 25% discount on tools from Ideal Industries, a company that produces connectors, hand tools, testers, meters, and more that are needed for success as an electrician
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

Jorge Garcia

Jorge Garcia has over 20 years of experience in the electrical field as both a practicing and electrical instructor. He has been a licensed electrician since 2000 and currently holds an Electrical Contractor and Master Electrician license from Texas. Jorge currently serves as the Department Chair for Construction, Manufacturing, Transportation Technology at Texas Southmost College. Additionally, he has over 15 years in business as an Electrical Contractor for Exit Light Services. Jorge has an Associate degree in Electrician Technology, a Bachelor of Science in Criminal Justice, a Master of Science in Management and Leadership, and is currently in a Learning Technology Ph.D. program. He also holds a Fire Suppression License from the State Fire Marshal Office, Licensed Irrigator, Limited License Electrician from Tennessee, License in Bilingual & Technology Education from Texas Education Agency, National Center for Construction Education & Research (NCCER) Electrical Instructor Certification, and an Occupational Safety and Health Administration (OSHA) Authorized Trainer license.

Nate Eaton

Nate Eaton brings a unique blend of instructor and practical experience to his instructor role for the Electrical Technician course. He holds multiple licenses and certificates for his field of work. Nate holds an associate degree in construction electricity from Northwest State Community College. He holds a diploma as a master/trainer instructor and has been a keynote speaker for a local high school graduation.

This Robotics Technician course provides an intensive overview of the skills needed in the robotics industry.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

An increasing number of companies are turning to robotics as a means for increased production. Robots have an impressive range of applications, from "pick and place" for packaging to welding, painting, or inspecting parts immediately after a process. However, robots are not foolproof; they require effective preventive maintenance to ensure they operate at full capacity. If a robot malfunctions, an experienced maintenance professional must know how to troubleshoot the exact cause.

Our Robotics Technician course provides an intensive overview of the skills needed for success in the robotics industry. In this advanced manufacturing training, you will learn math, safety, quality, electrical systems, automation, mechanical systems, fluid systems, and rigging to be on your way to a successful career as a robotics technician.

1. CNC
   1. Introduction to CAD and CAM for Machining 241
2. Electrical Systems
   1. Electrical Units 101
   2. Safety for Electrical Work 111
   3. Introduction to Circuits 201
   4. Introduction to Magnetism 211
   5. DC Circuit Components 221
   6. NEC® Overview 231
   7. AC Fundamentals 241
   8. Electrical Instruments 251
   9. Electrical Print Reading 261
   10. DC Power Sources 271
   11. AC Power Sources 281
   12. Conductor Selection 291
   13. Series Circuit Calculations 301
   14. Parallel Circuit Calculations 311
   15. Battery Selection 321
3. Fasteners
   1. Introduction to Assembly 101
4. Hydraulics and Pneumatics
   1. Introduction to Fluid Systems 101
   2. The Forces of Fluid Power 201
   3. Introduction to Hydraulic Components 221
   4. Introduction to Pneumatic Components 231
   5. Preventative Maintenance for Fluid Systems 261
   6. Hydraulic Power Variables 301
   7. Hydraulic Power Sources 302
   8. Pneumatic Power Variables 311
   9. Pneumatic Power Sources 312
   10. Hydraulic Control Valves 341
   11. Hydraulic Schematics and Basic Circuit Design 342
   12. Pneumatic Control Valves 351
   13. Pneumatic Schematics and Basic Circuit Design 352
   14. Actuator Applications 361
   15. Hydraulic Fluid Selection 371
   16. Contamination and Filter Selection 381
   17. Hydraulic Principles and System Design 391
5. Inspection
   1. Basics of Tolerance 121
   2. Blueprint Reading 131
   3. Interpreting Prints 231
   4. Introduction to GD&T 301
   5. Major Rules of GD&T 311
6. Lean
   1. Lean Manufacturing Overview 101
   2. Continuous Process Improvement: Managing Flow 124
   3. Continuous Process Improvement: Identifying and Eliminating Waste 125
   4. Total Productive Maintenance 141
   5. 5S Overview 151
   6. Intro to Six Sigma 171
   7. Troubleshooting 181
   8. Conducting Kaizen Events 191
   9. SPC Overview 211
   10. Metrics for Lean 231
   11. Process Flow Charting 241
   12. Strategies for Setup Reduction 251
   13. Management Tools: Problem Solving 270
   14. Six Sigma Goals and Tools 310
7. Mechanical Systems
   1. Introduction to Mechanical Systems 101
   2. Safety for Mechanical Work 111
   3. Forces of Machines 121
   4. Power Transmission Components 201
   5. Mechanical Power Variables 202
   6. Lubricant Fundamentals 211
   7. Bearing Applications 221
   8. Spring Applications 231
   9. Belt Drive Applications 241
   10. Gear Applications 251
   11. Gear Geometry 261
   12. Clutch and Brake Applications 271
8. Metal Cutting
   1. Safety for Metal Cutting 101
   2. Metal Cutting Fluid Safety 231
9. Motor Controls
   1. Relays, Contractors, and Motor Starters 201
   2. Distribution Systems 221
   3. Limit Switches and Proximity Sensos 231
   4. Introduction to electric Motors 301
   5. Symbols and Diagrams for Motors 311
   6. Logic and Line Diagrams 312
10. PLCs
    1. Introduction to PLCs 201
    2. Hardware for PLCs 211
    3. Numbering Systems and Codes 222
    4. PLC Inputs and Outputs 231
    5. Networking for PLCs 261
    6. Hand-Held Programmers of PLCs 280
    7. Overview of PLC Registers 305
11. PLCs: Siemens
    1. Basics of Siemens PLCs 200
    2. Siemens PLC Hardware 210
    3. Numbers, Codes, and Data Types for Siemens PLCs 220
    4. Siemens PLC Communication 230
    5. Siemens PLC Inputs and Outputs 240
    6. Siemens Human Machine Interfaces 250
    7. Siemens SIMATIC Modular PLCs 260
    8. Siemens SIMATIC S7-1200 PLCs 340
    9. Siemens SIMATIC S7-1500 PLCs 350
    10. Siemens Safety Integrated for Factory Automation 360
12. Quality
    1. ISO 9001:2015 Review 122
    2. Approaches to maintenance 131
    3. Customer-Focused Quality 155
    4. TS 16949:2009 Overview 221
13. Rigging
    1. Introduction to Machine Rigging 111
    2. Rigging Equipment 121
    3. Rigging Inspection and Safety 131
    4. Lifting and Moving Equipment 141
    5. Rigging Mechanics 220
14. Robotics
    1. Introduction to Robotics 201
    2. Robot Safety 211
    3. Automated Systems and Controls 216
    4. Robot Components 221
    5. End Effectors 225
    6. Robot Power and Drive Systems 265
    7. Robot Axes and Pathways 280
    8. Robot Sensors 315
    9. Vision Systems 320
    10. Robot Troubleshooting 331
    11. Concepts of Robot Programming 341
    12. Robot Maintenance 355
    13. Robot Installations 370
    14. Network Integration for Robot Workcells 376
15. Safety
    1. Introduction to OSHA 101
    2. Ergonomics 102
    3. Personal Protective Equipment 111
    4. Noise Reduction and Hearing Conservation 121
    5. Respiratory Safety 131
    6. Lockout/Tagout Procedures 141
    7. SDS and Hazard Communication 151
    8. Bloodborne Pathogens 161
    9. Walking and Working Surfaces 171
    10. Fire Safety and Prevention 181
    11. Flammable/Combustible Liquids 191
    12. Safety for Lifting Devices 211
    13. Powered Industrial Track Safety 221
    14. Confined Spaces 231
    15. Environmental Safety Hazards 241
    16. Machine Guarding 271
16. Shop Essentials (Applied Mathematics)
    1. Math Fundamentals 101
    2. Math: Fractions and Decimals 111
    3. Units of Measurement 112
    4. Manufacturing Process Applications: Part I 124
    5. Manufacturing Process Applications: Part !! 125
    6. Geometry: Lines and Angles 151
    7. Geometry: Triangles 161
    8. Geometry: Circles and Polygons 171
    9. Trigonometry: The Pythagorean Theorem 201
    10. Trigonometry: Sine, Cosine, Tangent 211
    11. Statistics 231
17. Supervisor Essentials
    1. Essentials of Leadership 100
    2. Managing Performance: Best Practice 130
    3. Managing Performance: Corrective Actions 135
    4. Conflict Resolution Principles 150
    5. Conflict Resolution for Different Groups 155
    6. Team Leadership 160
    7. Manufacturing Management 180
    8. Personal Effectiveness 190
    9. Managing the Diverse Workplace 210
    10. Harassment and Discrimination 215
    11. Performance Management and the Law 230
18. Welding
    1. Introduction to Automation 291
19. Workforce Essentials
    1. Essentials of Communication 115
20. Virtual Labs/Simulations (optional)
    1. Safety Awareness in Manufacturing
    2. Fire Safety
    3. 5S and Hand Tool Identification
    4. Lockout Tagout Procedures

What you will learn

• Troubleshooting
• GD&T
• Production Floor Safety
• Six Sigma, 5S, Lean, and TPM
• PLC Equipment and Communication
• Electrical, Mechanical, and Fluid Systems
• Robot Programming and Maintenance

How you will benefit

• Prepare for a career as a robotics technician, automation technician, electrical and Instrumentation (E and I) technician, electronics technician, instrument specialist, or instrumentation technician
• Gain confidence in your ability to perform your job
• Get the education you need in a self-paced, online format
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This course provides an intensive overview of tool and die making and will teach you about workholding, math, inspection, safety, machining, materials, quality, and grinding.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Do you want to play an integral role in a manufacturing process? Are you looking for a way to become more indispensable to your employer in the manufacturing industry? Tool and die makers are skilled artisans who enter their careers after a combination of education and hands-on training. This online Tool and Die Maker course is the perfect way to get started in your new career as a tool and die maker.

This course provides an intensive overview of the skills necessary for tool and die making. You will learn workholding, math, inspection, safety, machining, materials, quality, and grinding. Upon completion of the course, you'll have obtained the required knowledge and proven competency in the necessary areas for a successful career as a tool and die maker.

1. Workholding
   1. Intro to Workholding 104
   2. Locating Devices 107
   3. Clamping Basics 108
   4. Chucks, Collets, and Vises 110
   5. Drill Bushing Selection 230
2. Math
   1. Math Fundamentals 101
   2. Math: Fractions and Decimals 111
   3. Blueprint Reading 131
   4. Algebra Fundamentals 141
   5. Geometry: Lines and Angles 151
   6. Geometry: Triangles 161
   7. Geometry: Circles and Polygons 171
   8. Trigonometry: The Pythagorean Theorem 201
   9. Trigonometry: Sine, Cosine, Tangent 211
   10. Statistics 231
3. Inspection
   1. Basic Measurement 101
   2. Introduction to GD&T 301
   3. Major Rules of GD&T 311
   4. Inspecting a Prismatic Part 321
   5. Inspecting a Cylindrical Part 331
4. Metal Cutting
   1. Cutting Processes 111
   2. Safety for Metal Cutting 101
   3. Overview of Machine Tools 121
   4. Basic Cutting Theory 201
   5. Band Saw Operation 211
   6. Introduction to Metal Cutting Fluids 221
   7. Metal Cutting Fluid Safety 231
   8. Toolholders for Turning 260
   9. Speed and Feed for the Lathe 301
   10. Speed and Feed for the Mill 311
   11. Machining Titanium Alloys 325
   12. Lathe Tool Geometry 351
   13. Mill Tool Geometry 361
   14. Drill Tool Geometry 371
   15. Intro to EDM 100
5. Machining
   1. Manual Mill Basics 201
   2. Engine Lathe Basics 211
   3. Manual Mill Setup 221
   4. Overview of Engine Lathe Setup 205
   5. Benchwork and Layout Operations 241
   6. Manual Mill Operation 251
   7. Engine Lathe Operation 225
   8. Holemaking on the Manual Mill 271
   9. Threading on the Engine Lathe 235
   10. Taper Turning on the Engine Lathe 240
   11. Introduction to CNC Machines 201
   12. Basics of the CNC Lathe 211
   13. Basics of the CNC Mill 212
   14. Coordinates for the CNC Lathe 221
   15. Coordinates for the CNC Mill 222
   16. CNC Specs for the Mill 220
   17. CNC Specs for the Lathe 225
   18. Basics of G Code Programming 231
   19. Introduction to CAD and CAM for Machining 241
   20. Control Panel Functions for the CNC Lathe 251
   21. Control Panel Functions for the CNC Mill 252
   22. Creating a CNC Turning Program 301
   23. Creating a CNC Milling Program 302
   24. Calculations for Programming the Mill 312
   25. Turning Calculations 285
   26. Canned Cycles for the Lathe 321
   27. Canned Cycles for the Mill 322
   28. BB.Haas Mill: Control Panel Overview 250
   29. Haas Lathe: Control Panel Overview 255
   30. Haas Mill: First Part Runs 320
   31. Haas Lathe: First Part Runs 325
   32. Fanuc Mill: Control Panel Overview 250
   33. Fanuc Lathe: Control Panel Overview 255
   34. Fanuc Mill: First Part Runs 320
   35. Fanuc Lathe: First Part Runs 325
   36. Mazak Mill: Control Panel Overview 250
   37. Mazak Lathe: Control Panel Overview 255
   38. Creating an EIA/ISO Program for the Mazak Mill 286
   39. Creating an EIA/ISO Program for the Mazak Lathe 287
   40. Creating a Mazatrol Program for the Mill 288
   41. Creating a Mazatrol Program for the Lathe 289
   42. Mazak Mill: First Part Runs 320
   43. Mazak Lathe: First Part Runs 325
6. Safety
   1. Intro to OSHA 101
   2. Personal Protective Equipment 111
   3. Noise Reduction and Hearing Conservation 121
   4. Respiratory Safety 131
   5. Lockout/Tagout Procedures 141
   6. SDS and Hazard Communication 151
   7. Bloodborne Pathogens 161
   8. Walking and Working Surfaces 171
   9. Fire Safety and Prevention 181
   10. Flammable/Combustible Liquids 191
   11. Ergonomics 102
   12. Hand and Power Tool Safety 201
   13. Safety for Lifting Devices 211
   14. Powered Industrial Truck Safety 221
   15. Confined Spaces 231
   16. Environmental Safety Hazards 241
   17. Machine Guarding 140
7. Materials
   1. Introduction to Physical Properties 101
   2. Introduction to Mechanical Properties 111
   3. Introduction to Metals 121
   4. Metal Manufacturing 140
   5. Classification of Steel 201
   6. Essentials of Heat Treatment of Steel 211
   7. Hardness Testing 221
   8. Ferrous Metals 231
   9. Nonferrous Metals 241
   10. Exotic Alloys 301
8. Quality and Manufacturing Management
   1. Lean Manufacturing Overview 101
   2. Essentials of Leadership 110
   3. Essentials of Communication 120
   4. ISO 9001: 2015 Review 122
   5. Continuous Process Improvement: Managing Flow 124
   6. Manufacturing Process Applications: Part I 124
   7. Continuous Process Improvement: Identifying and Eliminating Waste 125
   8. Manufacturing Process Applications: Part II 125
   9. Managing Performance: Best Practices 130
   10. Approaches to Maintenance 131
   11. Managing Performance: Corrective Actions 135
   12. Equipment/Tool Design and Development 137
   13. Total Productive Maintenance 141
   14. Conflict Resolution Principles 150
   15. 5S Overview 151
   16. Conflict Resolution for Different Groups 155
   17. Team Leadership 160
   18. Intro to Six Sigma 171
   19. Quality and Customer Service 175
   20. Manufacturing Management 180
   21. Troubleshooting 181
   22. Personal Effectiveness 190
   23. Conducting Kaizen Events 191
   24. Managing the Diverse Workplace 210
   25. SPC Overview 211
   26. Harassment and Discrimination 215
   27. Performance Management and the Law 230
   28. BB.Metrics for Lean 231
   29. Process Flow Charting 241
   30. Strategies for Setup Reduction 251
   31. Management Tools: Problem Solving 270
   32. Management Tools: Product and Process Design 275
   33. Six Sigma Goals and Tools 310
9. Grinding
   1. Grinding Processes 201
   2. Grinding Safety 211
   3. Basic Grinding Theory 221
   4. Basics of the Surface Grinder 231
   5. Basics of the Cylindrical Grinder 232
   6. Basics of the Centerless Grinder 233
   7. Setup for the Surface Grinder 241
   8. Setup for the Cylindrical Grinder 242
   9. Setup for the Centerless Grinder 243
   10. Cylindrical Grinder Operation 252
   11. Centerless Grinder Operation 253
   12. Introduction to Grinding Fluids 261
   13. Grinding Variables 301
   14. Grinding Ferrous Metals 311
   15. Grinding Nonferrous Metals 321
   16. Grinding Wheel Materials 331
   17. Grinding Wheel Geometry 361
   18. Dressing and Truing 341
10. Stamping and Fabrication
    1. Die Components 130
    2. Die Cutting Variables 200
    3. Fabrication Process 232

What you will learn

• Production Floor Safety
• CNC Controls and Programming
• Metallurgy
• Machining and Grinding Processes
• Inspection Methods
• Six Sigma, 5S, Lean, and TPM
• Workholding Principles

How you will benefit

• Prepare for a career as a tool and die maker, die maker, tool and die machinist, or toolmaker
• Gain confidence in your ability to perform your job
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

This online course will provide an intensive overview of the toolmaking industry and the skills needed to work in it. You will learn a variety of important skills, including workholding, math, inspection, safety, machining, materials, quality, grinding, and stamping.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Adobe Acrobat Reader.
• Software must be installed and fully operational before the course begins.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Manufacturers are looking for highly skilled workers to create increasingly complex and important products. If you want a stable career in an industry that needs you, consider becoming a toolmaker. This online Toolmaker course will provide you with the knowledge and skills you need to prove competency and begin your new career quickly.

The Toolmaker course provides an intensive overview of the skills necessary for toolmaking, including workholding, math, inspection, safety, machining, materials, quality, grinding, and stamping.

1. Workholding
   1. Intro to Workholding 104
   2. Locating Devices 107
   3. Clamping Basics 108
   4. Chucks, Collets, and Vises 110
   5. Drill Bushing Selection 230
2. Math
   1. Math Fundamentals 101
   2. Math: Fractions and Decimals 111
   3. Blueprint Reading 131
   4. Algebra Fundamentals 141
   5. Geometry: Lines and Angles 151
   6. Geometry: Triangles 161
   7. Geometry: Circles and Polygons 171
   8. Trigonometry: The Pythagorean Theorem 201
   9. Trigonometry: Sine, Cosine, Tangent 211
   10. Statistics 231
3. Inspection
   1. Basic Measurement 101
   2. Introduction to GD&T 301
   3. Major Rules of GD&T 311
   4. Inspecting a Prismatic Part 321
   5. Inspecting a Cylindrical Part 331
4. Metal Cutting
   1. Cutting Processes 111
   2. Safety for Metal Cutting 101
   3. Overview of Machine Tools 121
   4. Basic Cutting Theory 201
   5. Band Saw Operation 211
   6. Introduction to Metal Cutting Fluids 221
   7. Metal Cutting Fluid Safety 231
   8. Toolholders for Turning 260
   9. Speed and Feed for the Lathe 301
   10. Speed and Feed for the Mill 311
   11. Machining Titanium Alloys 325
   12. Lathe Tool Geometry 351
   13. Mill Tool Geometry 361
   14. Drill Tool Geometry 371
   15. Intro to EDM 100
5. Machining
   1. Manual Mill Basics 201
   2. Engine Lathe Basics 211
   3. Manual Mill Setup 221
   4. Overview of Engine Lathe Setup 205
   5. Benchwork and Layout Operations 241
   6. Manual Mill Operation 251
   7. Engine Lathe Operation 225
   8. Holemaking on the Manual Mill 271
   9. Threading on the Engine Lathe 235
   10. Taper Turning on the Engine Lathe 240
   11. Introduction to CNC Machines 201
   12. Basics of the CNC Lathe 211
   13. Basics of the CNC Mill 212
   14. Coordinates for the CNC Lathe 221
   15. Coordinates for the CNC Mill 222
   16. CNC Specs for the Mill 220
   17. CNC Specs for the Lathe 225
   18. Basics of G Code Programming 231
   19. Introduction to CAD and CAM for Machining 241
   20. Control Panel Functions for the CNC Lathe 251
   21. Control Panel Functions for the CNC Mill 252
   22. Creating a CNC Turning Program 301
   23. Creating a CNC Milling Program 302
   24. Calculations for Programming the Mill 312
   25. Turning Calculations 285
   26. Canned Cycles for the Lathe 321
   27. Canned Cycles for the Mill 322
   28. Haas Mill: Control Panel Overview 250
   29. Haas Lathe: Control Panel Overview 255
   30. Haas Mill: First Part Runs 320
   31. Haas Lathe: First Part Runs 325
   32. Fanuc Mill: Control Panel Overview 250
   33. Fanuc Lathe: Control Panel Overview 255
   34. Fanuc Mill: First Part Runs 320
   35. Fanuc Lathe: First Part Runs 325
   36. Mazak Mill: Control Panel Overview 250
   37. Mazak Lathe: Control Panel Overview 255
   38. Creating an EIA/ISO Program for the Mazak Mill 286
   39. Creating an EIA/ISO Program for the Mazak Lathe 287
   40. Creating a Mazatrol Program for the Mill 288
   41. Creating a Mazatrol Program for the Lathe 289
   42. Mazak Mill: First Part Runs 320
   43. Mazak Lathe: First Part Runs 325
6. Safety
   1. Intro to OSHA 101
   2. Personal Protective Equipment 111
   3. Noise Reduction and Hearing Conservation 121
   4. Respiratory Safety 131
   5. Lockout/Tagout Procedures 141
   6. SDS and Hazard Communication 151
   7. Bloodborne Pathogens 161
   8. Walking and Working Surfaces 171
   9. Fire Safety and Prevention 181
   10. Flammable/Combustible Liquids 191
   11. Ergonomics 102
   12. Hand and Power Tool Safety 201
   13. Safety for Lifting Devices 211
   14. Powered Industrial Truck Safety 221
   15. Confined Spaces 231
   16. Environmental Safety Hazards 241
   17. Machine Guarding 140
7. Materials
   1. Basics of Siemens PLCs 200
   2. Siemens PLC Hardware 210
   3. Siemens PLC Inputs and Outputs 240
   4. Siemens Human Machine Interfaces 250
   5. Siemens SIMATIC Modular PLCs 260
   6. Siemens SIMATIC S7-1200 PLCs 340
   7. Siemens SIMATIC S7-1500 PLCs 350
   8. Siemens Safety Integrated for Factory Automation 360
   9. Intro to PLCs 200
   10. Hardware for PLCs 210
   11. PLC Inputs and Outputs 240
   12. Hand-Held Programmers of PLCs 280
   13. Overview of PLC Registers 305
8. Quality and Manufacturing Management
   1. Lean Manufacturing Overview 101
   2. Essentials of Leadership 110
   3. Essentials of Communication 120
   4. ISO 9001: 2015 Review 122
   5. Continuous Process Improvement: Managing Flow 124
   6. Manufacturing Process Applications: Part I 124
   7. Continuous Process Improvement: Identifying and Eliminating Waste 125
   8. Manufacturing Process Applications: Part II 125
   9. Managing Performance: Best Practices 130
   10. Approaches to Maintenance 131
   11. Managing Performance: Corrective Actions 135
   12. Equipment/Tool Design and Development 137
   13. Total Productive Maintenance 141
   14. Conflict Resolution Principles 150
   15. 5S Overview 151
   16. Conflict Resolution for Different Groups 155
   17. Team Leadership 160
   18. Intro to Six Sigma 171
   19. Quality and Customer Service 175
   20. Manufacturing Management 180
   21. Troubleshooting 181
   22. Personal Effectiveness 190
   23. Conducting Kaizen Events 191
   24. Managing the Diverse Workplace 210
   25. SPC Overview 211
   26. Harassment and Discrimination 215
   27. Performance Management and the Law 230
   28. Metrics for Lean 231
   29. Process Flow Charting 241
   30. Strategies for Setup Reduction 251
   31. Management Tools: Problem Solving 270
   32. Management Tools: Product and Process Design 275
   33. Six Sigma Goals and Tools 310
9. Grinding
   1. Grinding Processes 201
   2. Grinding Safety 211
   3. Basic Grinding Theory 221
   4. Basics of the Surface Grinder 231
   5. Basics of the Cylindrical Grinder 232
   6. Basics of the Centerless Grinder 233
   7. Setup for the Surface Grinder 241
   8. Setup for the Cylindrical Grinder 242
   9. Setup for the Centerless Grinder 243
   10. Surface Grinder Operation 251
   11. Cylindrical Grinder Operation 252
   12. Centerless Grinder Operation 253
   13. Introduction to Grinding Fluids 261
   14. Grinding Variables 301
   15. Grinding Ferrous Metals 311
   16. Grinding Nonferrous Metals 321
   17. Grinding Wheel Materials 331
   18. Grinding Wheel Geometry 361
   19. Dressing and Truing 341
10. Stamping and Fabrication
    1. Die Components 130
    2. Die Cutting Variables 200
    3. Fabrication Process 232

What you will learn

• Production Floor Safety
• CNC Controls and Programming
• Metallurgy
• Machining and Grinding Processes
• Six Sigma, 5S, Lean, and TPM
• Workholding Principles

How you will benefit

• Prepare for a career as a toolmaker, tool and die maker, or tool and die machinist
• Gain the skills you need to confidently perform your job
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.

The Welder Technician course is an intensive overview of skills relating to welding techniques from the basic principles of metal cutting and rigging to safety guidelines and manufacturing management.

Requirements:

Hardware Requirements:

• This course can be taken on either a PC or Mac.

Software Requirements:

• PC: Windows 8 or later.
• Mac: macOS 10.6 or later.
• Browser: The latest version of Google Chrome or Mozilla Firefox are preferred. Microsoft Edge and Safari are also compatible.
• Software must be installed and fully operational before the course begins.
• Adobe Acrobat Reader.
• Video-based labs: The latest version of Google Chrome is preferred.

Other:

• Email capabilities and access to a personal email account.

Instructional Material Requirements:

The instructional materials required for this course are included in enrollment and will be available online.

Do you like to work with your hands? Are you looking for a career where you can do what you love and make good money? This online Welder Technician course is an accelerated training package that will provide you the required knowledge and skills you need for success as a welder.

The course provides an intensive overview of the skills necessary for a welder technician to perform the job, including lessons in math, inspection, safety, materials, quality, metal cutting, grinding, forming, robotics, rigging, and welding.

1. Abrasives
   1. Grinding Processes 201
   2. Grinding Safety 211
   3. Basics of the Surface Grinder 231
   4. Setup for the Surface Grinder 241
   5. Surface Grinder Operation 251
2. Fasteners
   1. Safety for Assembly 211
   2. Tools for Threaded Fasteners 235
3. Inspection
   1. Basic Measurement 101
   2. Basics of Tolerance 121
   3. Blueprint Reading 131
   4. Interpreting Prints 231
   5. Introduction to GD&T 301
   6. Major Rules of GD&T 311
   7. Inspecting a Prismatic Part 321
   8. Inspecting a Cylindrical Part 331
   9. In-Line Inspection Applications 381
4. Lean
   1. Lean Manufacturing Overview 101
   2. Continuous Process Improvement: Managing Flow 124
   3. Continuous Process Improvement: Identifying and Eliminating Waste 125
   4. 5S Overview 151
   5. Intro to Six Sigma 171
   6. Troubleshooting 181
   7. Conducting Kaizen Events 191
   8. SPC Overview 211
   9. Metrics for Lean 231
   10. Process Flow Charting 241
   11. Strategies for Setup Reduction 251
   12. Management Tools: Problem Solving 270
   13. Six Sigma Goals and Tools 310
5. Materials
   1. Introduction to Physical Properties 101
   2. Introduction to Mechanical Properties 111
   3. Introduction to Metals 121
   4. Introduction to Metal Manufacturing 180
   5. Classification of Steel 201
   6. Essentials of Heat Treatment of Steel 211
   7. Ferrous Metals 231
   8. Nonferrous Metals 241
   9. Exotic Alloys 301
6. Mechanical Systems
   1. Forces of Machines 121
7. Metal Cutting
   1. Safety for Metal Cutting 101
   2. Band Saw Operation 211
   3. Metal Cutting Fluid Safety 231
8. Press Brake
   1. Press Brake Safety 100
   2. Press Brake Components 110
   3. Bending Fundamentals 120
   4. Die Bending Operations 130
   5. Operating the Press Brake 200
   6. Press Brake Specifications 220
9. Quality
   1. ISO 9001:2015 Review 122
   2. Customer-Focused Quality 155
   3. TS 16949:2009 Overview 221
10. Rigging
    1. Introduction to Machine Rigging 111
    2. Rigging Equipment 121
    3. Rigging Inspection and Safety 131
    4. Lifting and Moving Equipment 141
    5. Rigging Mechanics 220
11. Robotics
    1. Robot Troubleshooting 331
    2. Robot Installations 370
12. Safety
    1. Introduction to OSHA 101
    2. Ergonomics 102
    3. Personal Protective Equipment 111
    4. Noise Reduction and Hearing Conservation 121
    5. Respiratory Safety 131
    6. Lockout/Tagout Procedures 141
    7. SDS and Hazard Communication 151
    8. Bloodborne Pathogens 161
    9. Walking and Working Surfaces 171
    10. Fire and Safety and Prevention 181
    11. Flammable/Combustible Liquids 191
    12. Hand and Power Tool Safety 201
    13. Safety for Lifting Devices 211
    14. Powered Industrial Truck Safety 221
    15. Confined Spaces 231
    16. Environmental Safety Hazards 241
    17. Machine Guarding 271
13. Shop Essentials (Applied Mathematics)
    1. Math Fundamentals 101
    2. Math: Fractions and Decimals 111
    3. Units of Measurement 112
    4. Manufacturing Process Applications: Part I 124
    5. Manufacturing Process Applications: Part II 125
    6. Geometry: Lines and Angles 151
    7. Geometry: Triangles 161
    8. Geometry: Circles and Polygons 171
    9. Trigonometry: The Pythagorean Theorem 201
    10. Trigonometry: Sine, Cosine, Tangent 211
    11. Statistics 231
14. Soldering
    1. Safety for Soldering 115
15. Supervisor Essentials
    1. Essentials of Leadership 100
    2. Managing Performance: Best Practices 130
    3. Managing Performance: Corrective Actions 135
    4. Conflict Resolution Principles 150
    5. Conflict Resolution for Different Groups 155
    6. Team Leadership 160
    7. Manufacturing Management 180
    8. Personal Effectiveness 190
    9. Managing the Diverse Workplace 210
    10. Harassment and Discrimination 215
    11. Performance Management and the Law 230
16. Welding
    1. Welding Safety Essentials 101
    2. PPE for Welding 111
    3. Welding Fumes and Gases Safety 121
    4. Electrical Safety for Welding 131
    5. Introduction to Welding 141
    6. Introduction to Welding Processes 151
    7. Material Tests for Welding 201
    8. Welding Ferrous Metals 211
    9. Welding Nonferrous Metals 212
    10. Overview of Weld Types 221
    11. Overview of Weld Defects 222
    12. Welding Symbols and Codes 231
    13. Fabrication Process 232
    14. Electrical Power for Arc Welding 241
    15. Introduction to GMAW 251
    16. Introduction to SMAW 252
    17. Overview of Soldering 271
    18. Oxyfuel Cutting Applications 282
    19. Plasma Cutting 283
    20. GMAW Applications 301
    21. Advanced GMAW Applications 302
    22. SMAW Applications 311
    23. GTAW Applications 331
17. Workforce Essentials
    1. Essentials of Communication 115
18. Virtual Labs/Simulations (optional)
    1. Fire Safety
    2. Safety Awareness in Manufacturing
    3. 5S and Hand Tool Identification
    4. Lockout Tagout Procedures
    5. Gas Metal Arc Welding
    6. Shielded Metal Arc Welding

What you will learn

• Welding Safety, Processes, and Applications
• Troubleshooting
• Inspection Methods
• Metallurgy
• Rigging
• Fabrication Processes

How you will benefit

• Prepare for a career as a welder technician
• Gain confidence in your ability to perform your job
• Access to five video-based simulation labs for virtual hands-on experience
• Get the knowledge and skills you need to start your career in an accelerated format
• Enrolled students are invited to attend our exclusive annual virtual National Apprenticeship Week events, featuring live webinars, workshops, and employer interactions

This is not an instructor facilitated course; however, support will be provided through email.